From 373dc625f82b47096893add42c4472e4a57ab7eb Mon Sep 17 00:00:00 2001 From: Aki Date: Wed, 9 Feb 2022 22:23:03 +0100 Subject: Moved third-party libraries to a separate subdirectory --- vorbis/doc/02-bitpacking.tex | 246 ------------------------------------------- 1 file changed, 246 deletions(-) delete mode 100644 vorbis/doc/02-bitpacking.tex (limited to 'vorbis/doc/02-bitpacking.tex') diff --git a/vorbis/doc/02-bitpacking.tex b/vorbis/doc/02-bitpacking.tex deleted file mode 100644 index 905dcaf..0000000 --- a/vorbis/doc/02-bitpacking.tex +++ /dev/null @@ -1,246 +0,0 @@ -% -*- mode: latex; TeX-master: "Vorbis_I_spec"; -*- -%!TEX root = Vorbis_I_spec.tex -\section{Bitpacking Convention} \label{vorbis:spec:bitpacking} - -\subsection{Overview} - -The Vorbis codec uses relatively unstructured raw packets containing -arbitrary-width binary integer fields. Logically, these packets are a -bitstream in which bits are coded one-by-one by the encoder and then -read one-by-one in the same monotonically increasing order by the -decoder. Most current binary storage arrangements group bits into a -native word size of eight bits (octets), sixteen bits, thirty-two bits -or, less commonly other fixed word sizes. The Vorbis bitpacking -convention specifies the correct mapping of the logical packet -bitstream into an actual representation in fixed-width words. - - -\subsubsection{octets, bytes and words} - -In most contemporary architectures, a 'byte' is synonymous with an -'octet', that is, eight bits. This has not always been the case; -seven, ten, eleven and sixteen bit 'bytes' have been used. For -purposes of the bitpacking convention, a byte implies the native, -smallest integer storage representation offered by a platform. On -modern platforms, this is generally assumed to be eight bits (not -necessarily because of the processor but because of the -filesystem/memory architecture. Modern filesystems invariably offer -bytes as the fundamental atom of storage). A 'word' is an integer -size that is a grouped multiple of this smallest size. - -The most ubiquitous architectures today consider a 'byte' to be an -octet (eight bits) and a word to be a group of two, four or eight -bytes (16, 32 or 64 bits). Note however that the Vorbis bitpacking -convention is still well defined for any native byte size; Vorbis uses -the native bit-width of a given storage system. This document assumes -that a byte is one octet for purposes of example. - -\subsubsection{bit order} - -A byte has a well-defined 'least significant' bit (LSb), which is the -only bit set when the byte is storing the two's complement integer -value +1. A byte's 'most significant' bit (MSb) is at the opposite -end of the byte. Bits in a byte are numbered from zero at the LSb to -$n$ ($n=7$ in an octet) for the -MSb. - - - -\subsubsection{byte order} - -Words are native groupings of multiple bytes. Several byte orderings -are possible in a word; the common ones are 3-2-1-0 ('big endian' or -'most significant byte first' in which the highest-valued byte comes -first), 0-1-2-3 ('little endian' or 'least significant byte first' in -which the lowest value byte comes first) and less commonly 3-1-2-0 and -0-2-1-3 ('mixed endian'). - -The Vorbis bitpacking convention specifies storage and bitstream -manipulation at the byte, not word, level, thus host word ordering is -of a concern only during optimization when writing high performance -code that operates on a word of storage at a time rather than by byte. -Logically, bytes are always coded and decoded in order from byte zero -through byte $n$. - - - -\subsubsection{coding bits into byte sequences} - -The Vorbis codec has need to code arbitrary bit-width integers, from -zero to 32 bits wide, into packets. These integer fields are not -aligned to the boundaries of the byte representation; the next field -is written at the bit position at which the previous field ends. - -The encoder logically packs integers by writing the LSb of a binary -integer to the logical bitstream first, followed by next least -significant bit, etc, until the requested number of bits have been -coded. When packing the bits into bytes, the encoder begins by -placing the LSb of the integer to be written into the least -significant unused bit position of the destination byte, followed by -the next-least significant bit of the source integer and so on up to -the requested number of bits. When all bits of the destination byte -have been filled, encoding continues by zeroing all bits of the next -byte and writing the next bit into the bit position 0 of that byte. -Decoding follows the same process as encoding, but by reading bits -from the byte stream and reassembling them into integers. - - - -\subsubsection{signedness} - -The signedness of a specific number resulting from decode is to be -interpreted by the decoder given decode context. That is, the three -bit binary pattern 'b111' can be taken to represent either 'seven' as -an unsigned integer, or '-1' as a signed, two's complement integer. -The encoder and decoder are responsible for knowing if fields are to -be treated as signed or unsigned. - - - -\subsubsection{coding example} - -Code the 4 bit integer value '12' [b1100] into an empty bytestream. -Bytestream result: - -\begin{Verbatim}[commandchars=\\\{\}] - | - V - - 7 6 5 4 3 2 1 0 -byte 0 [0 0 0 0 1 1 0 0] <- -byte 1 [ ] -byte 2 [ ] -byte 3 [ ] - ... -byte n [ ] bytestream length == 1 byte - -\end{Verbatim} - - -Continue by coding the 3 bit integer value '-1' [b111]: - -\begin{Verbatim}[commandchars=\\\{\}] - | - V - - 7 6 5 4 3 2 1 0 -byte 0 [0 1 1 1 1 1 0 0] <- -byte 1 [ ] -byte 2 [ ] -byte 3 [ ] - ... -byte n [ ] bytestream length == 1 byte -\end{Verbatim} - - -Continue by coding the 7 bit integer value '17' [b0010001]: - -\begin{Verbatim}[commandchars=\\\{\}] - | - V - - 7 6 5 4 3 2 1 0 -byte 0 [1 1 1 1 1 1 0 0] -byte 1 [0 0 0 0 1 0 0 0] <- -byte 2 [ ] -byte 3 [ ] - ... -byte n [ ] bytestream length == 2 bytes - bit cursor == 6 -\end{Verbatim} - - -Continue by coding the 13 bit integer value '6969' [b110 11001110 01]: - -\begin{Verbatim}[commandchars=\\\{\}] - | - V - - 7 6 5 4 3 2 1 0 -byte 0 [1 1 1 1 1 1 0 0] -byte 1 [0 1 0 0 1 0 0 0] -byte 2 [1 1 0 0 1 1 1 0] -byte 3 [0 0 0 0 0 1 1 0] <- - ... -byte n [ ] bytestream length == 4 bytes - -\end{Verbatim} - - - - -\subsubsection{decoding example} - -Reading from the beginning of the bytestream encoded in the above example: - -\begin{Verbatim}[commandchars=\\\{\}] - | - V - - 7 6 5 4 3 2 1 0 -byte 0 [1 1 1 1 1 1 0 0] <- -byte 1 [0 1 0 0 1 0 0 0] -byte 2 [1 1 0 0 1 1 1 0] -byte 3 [0 0 0 0 0 1 1 0] bytestream length == 4 bytes - -\end{Verbatim} - - -We read two, two-bit integer fields, resulting in the returned numbers -'b00' and 'b11'. Two things are worth noting here: - -\begin{itemize} -\item Although these four bits were originally written as a single -four-bit integer, reading some other combination of bit-widths from the -bitstream is well defined. There are no artificial alignment -boundaries maintained in the bitstream. - -\item The second value is the -two-bit-wide integer 'b11'. This value may be interpreted either as -the unsigned value '3', or the signed value '-1'. Signedness is -dependent on decode context. -\end{itemize} - - - - -\subsubsection{end-of-packet alignment} - -The typical use of bitpacking is to produce many independent -byte-aligned packets which are embedded into a larger byte-aligned -container structure, such as an Ogg transport bitstream. Externally, -each bytestream (encoded bitstream) must begin and end on a byte -boundary. Often, the encoded bitstream is not an integer number of -bytes, and so there is unused (uncoded) space in the last byte of a -packet. - -Unused space in the last byte of a bytestream is always zeroed during -the coding process. Thus, should this unused space be read, it will -return binary zeroes. - -Attempting to read past the end of an encoded packet results in an -'end-of-packet' condition. End-of-packet is not to be considered an -error; it is merely a state indicating that there is insufficient -remaining data to fulfill the desired read size. Vorbis uses truncated -packets as a normal mode of operation, and as such, decoders must -handle reading past the end of a packet as a typical mode of -operation. Any further read operations after an 'end-of-packet' -condition shall also return 'end-of-packet'. - - - -\subsubsection{reading zero bits} - -Reading a zero-bit-wide integer returns the value '0' and does not -increment the stream cursor. Reading to the end of the packet (but -not past, such that an 'end-of-packet' condition has not triggered) -and then reading a zero bit integer shall succeed, returning 0, and -not trigger an end-of-packet condition. Reading a zero-bit-wide -integer after a previous read sets 'end-of-packet' shall also fail -with 'end-of-packet'. - - - - - - -- cgit v1.1