From 32d5cbb90bcca185eb2f96307f1fc644c612178d Mon Sep 17 00:00:00 2001 From: Aki Date: Wed, 29 Sep 2021 21:56:06 +0200 Subject: Squashed 'libpng/' content from commit 3d3aae16 git-subtree-dir: libpng git-subtree-split: 3d3aae1697897e92176530bc6e85c551772614ea --- pngvalid.c | 6658 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 6658 insertions(+) create mode 100644 pngvalid.c (limited to 'pngvalid.c') diff --git a/pngvalid.c b/pngvalid.c new file mode 100644 index 0000000..faebe4b --- /dev/null +++ b/pngvalid.c @@ -0,0 +1,6658 @@ + +/* pngvalid.c - validate libpng by constructing then reading png files. + * + * Last changed in libpng 1.5.1 [February 3, 2011] + * Copyright (c) 2011 Glenn Randers-Pehrson + * Written by John Cunningham Bowler + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * NOTES: + * This is a C program that is intended to be linked against libpng. It + * generates bitmaps internally, stores them as PNG files (using the + * sequential write code) then reads them back (using the sequential + * read code) and validates that the result has the correct data. + * + * The program can be modified and extended to test the correctness of + * transformations performed by libpng. + */ + +#include "png.h" +#if PNG_LIBPNG_VER < 10500 +/* This delibarately lacks the PNG_CONST. */ +typedef png_byte *png_const_bytep; + +/* This is copied from 1.5.1 png.h: */ +#define PNG_INTERLACE_ADAM7_PASSES 7 +#define PNG_PASS_START_ROW(pass) (((1U&~(pass))<<(3-((pass)>>1)))&7) +#define PNG_PASS_START_COL(pass) (((1U& (pass))<<(3-(((pass)+1)>>1)))&7) +#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) +#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) +#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) +#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) +#define PNG_ROW_FROM_PASS_ROW(yIn, pass) \ + (((yIn)<>(((7-(off))-(pass))<<2)) & 0xFU) | \ + ((0x01145AF0U>>(((7-(off))-(pass))<<2)) & 0xF0U)) +#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ + ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) +#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ + ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) + +/* These are needed too for the defualt build: */ +#define PNG_WRITE_16BIT_SUPPORTED +#define PNG_READ_16BIT_SUPPORTED +#endif + +#include "zlib.h" /* For crc32 */ + +#include /* For floating point constants */ +#include /* For malloc */ +#include /* For memcpy, memset */ +#include /* For floor */ + +/* Unused formal parameter errors are removed using the following macro which is + * expected to have no bad effects on performance. + */ +#ifndef UNUSED +# if defined(__GNUC__) || defined(_MSC_VER) +# define UNUSED(param) (void)param; +# else +# define UNUSED(param) +# endif +#endif + +/***************************** EXCEPTION HANDLING *****************************/ +#include "contrib/visupng/cexcept.h" +struct png_store; +define_exception_type(struct png_store*); + +/* The following are macros to reduce typing everywhere where the well known + * name 'the_exception_context' must be defined. + */ +#define anon_context(ps) struct exception_context *the_exception_context = \ + &(ps)->exception_context +#define context(ps,fault) anon_context(ps); png_store *fault + +/******************************* UTILITIES ************************************/ +/* Error handling is particularly problematic in production code - error + * handlers often themselves have bugs which lead to programs that detect + * minor errors crashing. The following functions deal with one very + * common class of errors in error handlers - attempting to format error or + * warning messages into buffers that are too small. + */ +static size_t safecat(char *buffer, size_t bufsize, size_t pos, + PNG_CONST char *cat) +{ + while (pos < bufsize && cat != NULL && *cat != 0) + buffer[pos++] = *cat++; + + if (pos >= bufsize) + pos = bufsize-1; + + buffer[pos] = 0; + return pos; +} + +static size_t safecatn(char *buffer, size_t bufsize, size_t pos, int n) +{ + char number[64]; + sprintf(number, "%d", n); + return safecat(buffer, bufsize, pos, number); +} + +static size_t safecatd(char *buffer, size_t bufsize, size_t pos, double d, + int precision) +{ + char number[64]; + sprintf(number, "%.*f", precision, d); + return safecat(buffer, bufsize, pos, number); +} + +static PNG_CONST char invalid[] = "invalid"; +static PNG_CONST char sep[] = ": "; + +/* NOTE: this is indexed by ln2(bit_depth)! */ +static PNG_CONST char *bit_depths[8] = +{ + "1", "2", "4", "8", "16", invalid, invalid, invalid +}; + +static PNG_CONST char *colour_types[8] = +{ + "greyscale", invalid, "truecolour", "indexed-colour", + "greyscale with alpha", invalid, "truecolour with alpha", invalid +}; + +/* To get log-bit-depth from bit depth, returns 0 to 7 (7 on error). */ +static unsigned int +log2depth(png_byte bit_depth) +{ + switch (bit_depth) + { + case 1: + return 0; + + case 2: + return 1; + + case 4: + return 2; + + case 8: + return 3; + + case 16: + return 4; + + default: + return 7; + } +} + +/* A numeric ID based on PNG file characteristics. The 'do_interlace' field + * simply records whether pngvalid did the interlace itself or whether it + * was done by libpng. Width and height must be less than 256. + */ +#define FILEID(col, depth, interlace, width, height, do_interlace) \ + ((png_uint_32)((col) + ((depth)<<3) + ((interlace)<<8) + \ + (((do_interlace)!=0)<<15) + ((width)<<16) + ((height)<<24))) + +#define COL_FROM_ID(id) ((png_byte)((id)& 0x7U)) +#define DEPTH_FROM_ID(id) ((png_byte)(((id) >> 3) & 0x1fU)) +#define INTERLACE_FROM_ID(id) ((int)(((id) >> 8) & 0x3)) +#define DO_INTERLACE_FROM_ID(id) ((int)(((id)>>15) & 1)) +#define WIDTH_FROM_ID(id) (((id)>>16) & 0xff) +#define HEIGHT_FROM_ID(id) (((id)>>24) & 0xff) + +/* Utility to construct a standard name for a standard image. */ +static size_t +standard_name(char *buffer, size_t bufsize, size_t pos, png_byte colour_type, + int log_bit_depth, int interlace_type, png_uint_32 w, png_uint_32 h, + int do_interlace) +{ + pos = safecat(buffer, bufsize, pos, colour_types[colour_type]); + pos = safecat(buffer, bufsize, pos, " "); + pos = safecat(buffer, bufsize, pos, bit_depths[log_bit_depth]); + pos = safecat(buffer, bufsize, pos, " bit "); + + if (interlace_type != PNG_INTERLACE_NONE) + pos = safecat(buffer, bufsize, pos, "interlaced"); + if (do_interlace) + pos = safecat(buffer, bufsize, pos, "(pngvalid)"); + else + pos = safecat(buffer, bufsize, pos, "(libpng)"); + if (w > 0 || h > 0) + { + pos = safecat(buffer, bufsize, pos, " "); + pos = safecatn(buffer, bufsize, pos, w); + pos = safecat(buffer, bufsize, pos, "x"); + pos = safecatn(buffer, bufsize, pos, h); + } + + return pos; +} + +static size_t +standard_name_from_id(char *buffer, size_t bufsize, size_t pos, png_uint_32 id) +{ + return standard_name(buffer, bufsize, pos, COL_FROM_ID(id), + log2depth(DEPTH_FROM_ID(id)), INTERLACE_FROM_ID(id), + WIDTH_FROM_ID(id), HEIGHT_FROM_ID(id), DO_INTERLACE_FROM_ID(id)); +} + +/* Convenience API and defines to list valid formats. Note that 16 bit read and + * write support is required to do 16 bit read tests (we must be able to make a + * 16 bit image to test!) + */ +#ifdef PNG_WRITE_16BIT_SUPPORTED +# define WRITE_BDHI 4 +# ifdef PNG_READ_16BIT_SUPPORTED +# define READ_BDHI 4 +# define DO_16BIT +# endif +#else +# define WRITE_BDHI 3 +#endif +#ifndef DO_16BIT +# define READ_BDHI 3 +#endif + +static int +next_format(png_bytep colour_type, png_bytep bit_depth) +{ + if (*bit_depth == 0) + { + *colour_type = 0, *bit_depth = 1; + return 1; + } + + *bit_depth = (png_byte)(*bit_depth << 1); + + /* Palette images are restricted to 8 bit depth */ + if (*bit_depth <= 8 +# ifdef DO_16BIT + || (*colour_type != 3 && *bit_depth <= 16) +# endif + ) + return 1; + + /* Move to the next color type, or return 0 at the end. */ + switch (*colour_type) + { + case 0: + *colour_type = 2; + *bit_depth = 8; + return 1; + + case 2: + *colour_type = 3; + *bit_depth = 1; + return 1; + + case 3: + *colour_type = 4; + *bit_depth = 8; + return 1; + + case 4: + *colour_type = 6; + *bit_depth = 8; + return 1; + + default: + return 0; + } +} + +static unsigned int +sample(png_const_bytep row, png_byte colour_type, png_byte bit_depth, + png_uint_32 x, unsigned int sample_index) +{ + png_uint_32 bit_index, result; + + /* Find a sample index for the desired sample: */ + x *= bit_depth; + bit_index = x; + + if ((colour_type & 1) == 0) /* !palette */ + { + if (colour_type & 2) + bit_index *= 3; + + if (colour_type & 4) + bit_index += x; /* Alpha channel */ + + if (colour_type & (2+4)) + bit_index += sample_index * bit_depth; /* Multiple channels: select one */ + } + + /* Return the sample from the row as an integer. */ + row += bit_index >> 3; + result = *row; + + if (bit_depth == 8) + return result; + + else if (bit_depth > 8) + return (result << 8) + *++row; + + /* Less than 8 bits per sample. */ + bit_index &= 7; + return (result >> (8-bit_index-bit_depth)) & ((1U<> 3] & ~destMask; + unsigned int sourceByte = fromBuffer[fromIndex >> 3]; + + /* Don't rely on << or >> supporting '0' here, just in case: */ + fromIndex &= 7; + if (fromIndex > 0) sourceByte <<= fromIndex; + if ((toIndex & 7) > 0) sourceByte >>= toIndex & 7; + + toBuffer[toIndex >> 3] = (png_byte)(destByte | (sourceByte & destMask)); + } + else /* One or more bytes */ + memmove(toBuffer+(toIndex>>3), fromBuffer+(fromIndex>>3), pixelSize>>3); +} + +/* Compare pixels - they are assumed to start at the first byte in the + * given buffers. + */ +static int +pixel_cmp(png_const_bytep pa, png_const_bytep pb, png_uint_32 bit_width) +{ + if (memcmp(pa, pb, bit_width>>3) == 0) + { + png_uint_32 p; + + if ((bit_width & 7) == 0) return 0; + + /* Ok, any differences? */ + p = pa[bit_width >> 3]; + p ^= pb[bit_width >> 3]; + + if (p == 0) return 0; + + /* There are, but they may not be significant, remove the bits + * after the end (the low order bits in PNG.) + */ + bit_width &= 7; + p >>= 8-bit_width; + + if (p == 0) return 0; + } + + return 1; /* Different */ +} + +/*************************** BASIC PNG FILE WRITING ***************************/ +/* A png_store takes data from the sequential writer or provides data + * to the sequential reader. It can also store the result of a PNG + * write for later retrieval. + */ +#define STORE_BUFFER_SIZE 500 /* arbitrary */ +typedef struct png_store_buffer +{ + struct png_store_buffer* prev; /* NOTE: stored in reverse order */ + png_byte buffer[STORE_BUFFER_SIZE]; +} png_store_buffer; + +#define FILE_NAME_SIZE 64 + +typedef struct png_store_file +{ + struct png_store_file* next; /* as many as you like... */ + char name[FILE_NAME_SIZE]; + png_uint_32 id; /* must be correct (see FILEID) */ + png_size_t datacount; /* In this (the last) buffer */ + png_store_buffer data; /* Last buffer in file */ +} png_store_file; + +/* The following is a pool of memory allocated by a single libpng read or write + * operation. + */ +typedef struct store_pool +{ + struct png_store *store; /* Back pointer */ + struct store_memory *list; /* List of allocated memory */ + png_byte mark[4]; /* Before and after data */ + + /* Statistics for this run. */ + png_alloc_size_t max; /* Maximum single allocation */ + png_alloc_size_t current; /* Current allocation */ + png_alloc_size_t limit; /* Highest current allocation */ + png_alloc_size_t total; /* Total allocation */ + + /* Overall statistics (retained across successive runs). */ + png_alloc_size_t max_max; + png_alloc_size_t max_limit; + png_alloc_size_t max_total; +} store_pool; + +typedef struct png_store +{ + /* For cexcept.h exception handling - simply store one of these; + * the context is a self pointer but it may point to a different + * png_store (in fact it never does in this program.) + */ + struct exception_context + exception_context; + + unsigned int verbose :1; + unsigned int treat_warnings_as_errors :1; + unsigned int expect_error :1; + unsigned int expect_warning :1; + unsigned int saw_warning :1; + unsigned int speed :1; + unsigned int progressive :1; /* use progressive read */ + unsigned int validated :1; /* used as a temporary flag */ + int nerrors; + int nwarnings; + char test[128]; /* Name of test */ + char error[256]; + + /* Read fields */ + png_structp pread; /* Used to read a saved file */ + png_infop piread; + png_store_file* current; /* Set when reading */ + png_store_buffer* next; /* Set when reading */ + png_size_t readpos; /* Position in *next */ + png_byte* image; /* Buffer for reading interlaced images */ + size_t cb_image; /* Size of this buffer */ + store_pool read_memory_pool; + + /* Write fields */ + png_store_file* saved; + png_structp pwrite; /* Used when writing a new file */ + png_infop piwrite; + png_size_t writepos; /* Position in .new */ + char wname[FILE_NAME_SIZE]; + png_store_buffer new; /* The end of the new PNG file being written. */ + store_pool write_memory_pool; +} png_store; + +/* Initialization and cleanup */ +static void +store_pool_mark(png_byte *mark) +{ + /* Generate a new mark. This uses a boring repeatable algorithm and it is + * implemented here so that it gives the same set of numbers on every + * architecture. It's a linear congruential generator (Knuth or Sedgewick + * "Algorithms") but it comes from the 'feedback taps' table in Horowitz and + * Hill, "The Art of Electronics". + */ + static png_uint_32 u0 = 0x12345678, u1 = 1; + + /* There are thirty three bits, the next bit in the sequence is bit-33 XOR + * bit-20. The top 1 bit is in u1, the bottom 32 are in u0. + */ + int i; + for (i=0; i<4; ++i) + { + /* First generate 8 new bits then shift them in at the end. */ + png_uint_32 u = ((u0 >> (20-8)) ^ ((u1 << 7) | (u0 >> (32-7)))) & 0xff; + u1 <<= 8; + u1 |= u0 >> 24; + u0 <<= 8; + u0 |= u; + *mark++ = (png_byte)u; + } +} + +/* Use this for random 32 bit values, this function makes sure the result is + * non-zero. + */ +static png_uint_32 +random_32(void) +{ + + for(;;) + { + png_byte mark[4]; + png_uint_32 result; + + store_pool_mark(mark); + result = png_get_uint_32(mark); + + if (result != 0) + return result; + } +} + +static void +store_pool_init(png_store *ps, store_pool *pool) +{ + memset(pool, 0, sizeof *pool); + + pool->store = ps; + pool->list = NULL; + pool->max = pool->current = pool->limit = pool->total = 0; + pool->max_max = pool->max_limit = pool->max_total = 0; + store_pool_mark(pool->mark); +} + +static void +store_init(png_store* ps) +{ + memset(ps, 0, sizeof *ps); + init_exception_context(&ps->exception_context); + store_pool_init(ps, &ps->read_memory_pool); + store_pool_init(ps, &ps->write_memory_pool); + ps->verbose = 0; + ps->treat_warnings_as_errors = 0; + ps->expect_error = 0; + ps->expect_warning = 0; + ps->saw_warning = 0; + ps->speed = 0; + ps->progressive = 0; + ps->validated = 0; + ps->nerrors = ps->nwarnings = 0; + ps->pread = NULL; + ps->piread = NULL; + ps->saved = ps->current = NULL; + ps->next = NULL; + ps->readpos = 0; + ps->image = NULL; + ps->cb_image = 0; + ps->pwrite = NULL; + ps->piwrite = NULL; + ps->writepos = 0; + ps->new.prev = NULL; +} + +/* This somewhat odd function is used when reading an image to ensure that the + * buffer is big enough - this is why a png_structp is available. + */ +static void +store_ensure_image(png_store *ps, png_structp pp, size_t cb) +{ + if (ps->cb_image < cb) + { + if (ps->image != NULL) + { + free(ps->image-1); + ps->cb_image = 0; + } + + /* The buffer is deliberately mis-aligned. */ + ps->image = malloc(cb+1); + if (ps->image == NULL) + png_error(pp, "OOM allocating image buffer"); + + ++(ps->image); + ps->cb_image = cb; + } + + /* And, for error checking, the whole buffer is set to '1' - this + * matches what happens with the 'size' test images on write and also + * matches the unused bits in the test rows. + */ + memset(ps->image, 0xff, cb); +} + +static void +store_freebuffer(png_store_buffer* psb) +{ + if (psb->prev) + { + store_freebuffer(psb->prev); + free(psb->prev); + psb->prev = NULL; + } +} + +static void +store_freenew(png_store *ps) +{ + store_freebuffer(&ps->new); + ps->writepos = 0; +} + +static void +store_storenew(png_store *ps) +{ + png_store_buffer *pb; + + if (ps->writepos != STORE_BUFFER_SIZE) + png_error(ps->pwrite, "invalid store call"); + + pb = malloc(sizeof *pb); + + if (pb == NULL) + png_error(ps->pwrite, "store new: OOM"); + + *pb = ps->new; + ps->new.prev = pb; + ps->writepos = 0; +} + +static void +store_freefile(png_store_file **ppf) +{ + if (*ppf != NULL) + { + store_freefile(&(*ppf)->next); + + store_freebuffer(&(*ppf)->data); + (*ppf)->datacount = 0; + free(*ppf); + *ppf = NULL; + } +} + +/* Main interface to file storeage, after writing a new PNG file (see the API + * below) call store_storefile to store the result with the given name and id. + */ +static void +store_storefile(png_store *ps, png_uint_32 id) +{ + png_store_file *pf = malloc(sizeof *pf); + if (pf == NULL) + png_error(ps->pwrite, "storefile: OOM"); + safecat(pf->name, sizeof pf->name, 0, ps->wname); + pf->id = id; + pf->data = ps->new; + pf->datacount = ps->writepos; + ps->new.prev = NULL; + ps->writepos = 0; + + /* And save it. */ + pf->next = ps->saved; + ps->saved = pf; +} + +/* Generate an error message (in the given buffer) */ +static size_t +store_message(png_store *ps, png_structp pp, char *buffer, size_t bufsize, + size_t pos, PNG_CONST char *msg) +{ + if (pp != NULL && pp == ps->pread) + { + /* Reading a file */ + pos = safecat(buffer, bufsize, pos, "read: "); + + if (ps->current != NULL) + { + pos = safecat(buffer, bufsize, pos, ps->current->name); + pos = safecat(buffer, bufsize, pos, sep); + } + } + + else if (pp != NULL && pp == ps->pwrite) + { + /* Writing a file */ + pos = safecat(buffer, bufsize, pos, "write: "); + pos = safecat(buffer, bufsize, pos, ps->wname); + pos = safecat(buffer, bufsize, pos, sep); + } + + else + { + /* Neither reading nor writing (or a memory error in struct delete) */ + pos = safecat(buffer, bufsize, pos, "pngvalid: "); + } + + if (ps->test[0] != 0) + { + pos = safecat(buffer, bufsize, pos, ps->test); + pos = safecat(buffer, bufsize, pos, sep); + } + pos = safecat(buffer, bufsize, pos, msg); + return pos; +} + +/* Log an error or warning - the relevant count is always incremented. */ +static void +store_log(png_store* ps, png_structp pp, png_const_charp message, int is_error) +{ + /* The warning is copied to the error buffer if there are no errors and it is + * the first warning. The error is copied to the error buffer if it is the + * first error (overwriting any prior warnings). + */ + if (is_error ? (ps->nerrors)++ == 0 : + (ps->nwarnings)++ == 0 && ps->nerrors == 0) + store_message(ps, pp, ps->error, sizeof ps->error, 0, message); + + if (ps->verbose) + { + char buffer[256]; + size_t pos; + + if (is_error) + pos = safecat(buffer, sizeof buffer, 0, "error: "); + else + pos = safecat(buffer, sizeof buffer, 0, "warning: "); + + store_message(ps, pp, buffer, sizeof buffer, pos, message); + fputs(buffer, stderr); + fputc('\n', stderr); + } +} + +/* Functions to use as PNG callbacks. */ +static void +store_error(png_structp pp, png_const_charp message) /* PNG_NORETURN */ +{ + png_store *ps = png_get_error_ptr(pp); + + if (!ps->expect_error) + store_log(ps, pp, message, 1 /* error */); + + /* And finally throw an exception. */ + { + struct exception_context *the_exception_context = &ps->exception_context; + Throw ps; + } +} + +static void +store_warning(png_structp pp, png_const_charp message) +{ + png_store *ps = png_get_error_ptr(pp); + + if (!ps->expect_warning) + store_log(ps, pp, message, 0 /* warning */); + else + ps->saw_warning = 1; +} + +static void +store_write(png_structp pp, png_bytep pb, png_size_t st) +{ + png_store *ps = png_get_io_ptr(pp); + + if (ps->pwrite != pp) + png_error(pp, "store state damaged"); + + while (st > 0) + { + size_t cb; + + if (ps->writepos >= STORE_BUFFER_SIZE) + store_storenew(ps); + + cb = st; + + if (cb > STORE_BUFFER_SIZE - ps->writepos) + cb = STORE_BUFFER_SIZE - ps->writepos; + + memcpy(ps->new.buffer + ps->writepos, pb, cb); + pb += cb; + st -= cb; + ps->writepos += cb; + } +} + +static void +store_flush(png_structp pp) +{ + UNUSED(pp) /*DOES NOTHING*/ +} + +static size_t +store_read_buffer_size(png_store *ps) +{ + /* Return the bytes available for read in the current buffer. */ + if (ps->next != &ps->current->data) + return STORE_BUFFER_SIZE; + + return ps->current->datacount; +} + +/* Return total bytes available for read. */ +static size_t +store_read_buffer_avail(png_store *ps) +{ + if (ps->current != NULL && ps->next != NULL) + { + png_store_buffer *next = &ps->current->data; + size_t cbAvail = ps->current->datacount; + + while (next != ps->next && next != NULL) + { + next = next->prev; + cbAvail += STORE_BUFFER_SIZE; + } + + if (next != ps->next) + png_error(ps->pread, "buffer read error"); + + if (cbAvail > ps->readpos) + return cbAvail - ps->readpos; + } + + return 0; +} + +static int +store_read_buffer_next(png_store *ps) +{ + png_store_buffer *pbOld = ps->next; + png_store_buffer *pbNew = &ps->current->data; + if (pbOld != pbNew) + { + while (pbNew != NULL && pbNew->prev != pbOld) + pbNew = pbNew->prev; + + if (pbNew != NULL) + { + ps->next = pbNew; + ps->readpos = 0; + return 1; + } + + png_error(ps->pread, "buffer lost"); + } + + return 0; /* EOF or error */ +} + +/* Need separate implementation and callback to allow use of the same code + * during progressive read, where the io_ptr is set internally by libpng. + */ +static void +store_read_imp(png_store *ps, png_bytep pb, png_size_t st) +{ + if (ps->current == NULL || ps->next == NULL) + png_error(ps->pread, "store state damaged"); + + while (st > 0) + { + size_t cbAvail = store_read_buffer_size(ps) - ps->readpos; + + if (cbAvail > 0) + { + if (cbAvail > st) cbAvail = st; + memcpy(pb, ps->next->buffer + ps->readpos, cbAvail); + st -= cbAvail; + pb += cbAvail; + ps->readpos += cbAvail; + } + + else if (!store_read_buffer_next(ps)) + png_error(ps->pread, "read beyond end of file"); + } +} + +static void +store_read(png_structp pp, png_bytep pb, png_size_t st) +{ + png_store *ps = png_get_io_ptr(pp); + + if (ps == NULL || ps->pread != pp) + png_error(pp, "bad store read call"); + + store_read_imp(ps, pb, st); +} + +static void +store_progressive_read(png_store *ps, png_structp pp, png_infop pi) +{ + /* Notice that a call to store_read will cause this function to fail because + * readpos will be set. + */ + if (ps->pread != pp || ps->current == NULL || ps->next == NULL) + png_error(pp, "store state damaged (progressive)"); + + do + { + if (ps->readpos != 0) + png_error(pp, "store_read called during progressive read"); + + png_process_data(pp, pi, ps->next->buffer, store_read_buffer_size(ps)); + } + while (store_read_buffer_next(ps)); +} + +/***************************** MEMORY MANAGEMENT*** ***************************/ +/* A store_memory is simply the header for an allocated block of memory. The + * pointer returned to libpng is just after the end of the header block, the + * allocated memory is followed by a second copy of the 'mark'. + */ +typedef struct store_memory +{ + store_pool *pool; /* Originating pool */ + struct store_memory *next; /* Singly linked list */ + png_alloc_size_t size; /* Size of memory allocated */ + png_byte mark[4]; /* ID marker */ +} store_memory; + +/* Handle a fatal error in memory allocation. This calls png_error if the + * libpng struct is non-NULL, else it outputs a message and returns. This means + * that a memory problem while libpng is running will abort (png_error) the + * handling of particular file while one in cleanup (after the destroy of the + * struct has returned) will simply keep going and free (or attempt to free) + * all the memory. + */ +static void +store_pool_error(png_store *ps, png_structp pp, PNG_CONST char *msg) +{ + if (pp != NULL) + png_error(pp, msg); + + /* Else we have to do it ourselves. png_error eventually calls store_log, + * above. store_log accepts a NULL png_structp - it just changes what gets + * output by store_message. + */ + store_log(ps, pp, msg, 1 /* error */); +} + +static void +store_memory_free(png_structp pp, store_pool *pool, store_memory *memory) +{ + /* Note that pp may be NULL (see store_pool_delete below), the caller has + * found 'memory' in pool->list *and* unlinked this entry, so this is a valid + * pointer (for sure), but the contents may have been trashed. + */ + if (memory->pool != pool) + store_pool_error(pool->store, pp, "memory corrupted (pool)"); + + else if (memcmp(memory->mark, pool->mark, sizeof memory->mark) != 0) + store_pool_error(pool->store, pp, "memory corrupted (start)"); + + /* It should be safe to read the size field now. */ + else + { + png_alloc_size_t cb = memory->size; + + if (cb > pool->max) + store_pool_error(pool->store, pp, "memory corrupted (size)"); + + else if (memcmp((png_bytep)(memory+1)+cb, pool->mark, sizeof pool->mark) + != 0) + store_pool_error(pool->store, pp, "memory corrupted (end)"); + + /* Finally give the library a chance to find problems too: */ + else + { + pool->current -= cb; + free(memory); + } + } +} + +static void +store_pool_delete(png_store *ps, store_pool *pool) +{ + if (pool->list != NULL) + { + fprintf(stderr, "%s: %s %s: memory lost (list follows):\n", ps->test, + pool == &ps->read_memory_pool ? "read" : "write", + pool == &ps->read_memory_pool ? (ps->current != NULL ? + ps->current->name : "unknown file") : ps->wname); + ++ps->nerrors; + + do + { + store_memory *next = pool->list; + pool->list = next->next; + next->next = NULL; + + fprintf(stderr, "\t%lu bytes @ %p\n", + (unsigned long)next->size, next+1); + /* The NULL means this will always return, even if the memory is + * corrupted. + */ + store_memory_free(NULL, pool, next); + } + while (pool->list != NULL); + } + + /* And reset the other fields too for the next time. */ + if (pool->max > pool->max_max) pool->max_max = pool->max; + pool->max = 0; + if (pool->current != 0) /* unexpected internal error */ + fprintf(stderr, "%s: %s %s: memory counter mismatch (internal error)\n", + ps->test, pool == &ps->read_memory_pool ? "read" : "write", + pool == &ps->read_memory_pool ? (ps->current != NULL ? + ps->current->name : "unknown file") : ps->wname); + pool->current = 0; + + if (pool->limit > pool->max_limit) + pool->max_limit = pool->limit; + + pool->limit = 0; + + if (pool->total > pool->max_total) + pool->max_total = pool->total; + + pool->total = 0; + + /* Get a new mark too. */ + store_pool_mark(pool->mark); +} + +/* The memory callbacks: */ +static png_voidp +store_malloc(png_structp pp, png_alloc_size_t cb) +{ + store_pool *pool = png_get_mem_ptr(pp); + store_memory *new = malloc(cb + (sizeof *new) + (sizeof pool->mark)); + + if (new != NULL) + { + if (cb > pool->max) + pool->max = cb; + + pool->current += cb; + + if (pool->current > pool->limit) + pool->limit = pool->current; + + pool->total += cb; + + new->size = cb; + memcpy(new->mark, pool->mark, sizeof new->mark); + memcpy((png_byte*)(new+1) + cb, pool->mark, sizeof pool->mark); + new->pool = pool; + new->next = pool->list; + pool->list = new; + ++new; + } + + else + store_pool_error(pool->store, pp, "out of memory"); + + return new; +} + +static void +store_free(png_structp pp, png_voidp memory) +{ + store_pool *pool = png_get_mem_ptr(pp); + store_memory *this = memory, **test; + + /* First check that this 'memory' really is valid memory - it must be in the + * pool list. If it is, use the shared memory_free function to free it. + */ + --this; + for (test = &pool->list; *test != this; test = &(*test)->next) + { + if (*test == NULL) + { + store_pool_error(pool->store, pp, "bad pointer to free"); + return; + } + } + + /* Unlink this entry, *test == this. */ + *test = this->next; + this->next = NULL; + store_memory_free(pp, pool, this); +} + +/* Setup functions. */ +/* Cleanup when aborting a write or after storing the new file. */ +static void +store_write_reset(png_store *ps) +{ + if (ps->pwrite != NULL) + { + anon_context(ps); + + Try + png_destroy_write_struct(&ps->pwrite, &ps->piwrite); + + Catch_anonymous + { + /* memory corruption: continue. */ + } + + ps->pwrite = NULL; + ps->piwrite = NULL; + } + + /* And make sure that all the memory has been freed - this will output + * spurious errors in the case of memory corruption above, but this is safe. + */ + store_pool_delete(ps, &ps->write_memory_pool); + + store_freenew(ps); +} + +/* The following is the main write function, it returns a png_struct and, + * optionally, a png_info suitable for writiing a new PNG file. Use + * store_storefile above to record this file after it has been written. The + * returned libpng structures as destroyed by store_write_reset above. + */ +static png_structp +set_store_for_write(png_store *ps, png_infopp ppi, + PNG_CONST char * volatile name) +{ + anon_context(ps); + + Try + { + if (ps->pwrite != NULL) + png_error(ps->pwrite, "write store already in use"); + + store_write_reset(ps); + safecat(ps->wname, sizeof ps->wname, 0, name); + + /* Don't do the slow memory checks if doing a speed test. */ + if (ps->speed) + ps->pwrite = png_create_write_struct(PNG_LIBPNG_VER_STRING, + ps, store_error, store_warning); + + else + ps->pwrite = png_create_write_struct_2(PNG_LIBPNG_VER_STRING, + ps, store_error, store_warning, &ps->write_memory_pool, + store_malloc, store_free); + + png_set_write_fn(ps->pwrite, ps, store_write, store_flush); + + if (ppi != NULL) + *ppi = ps->piwrite = png_create_info_struct(ps->pwrite); + } + + Catch_anonymous + return NULL; + + return ps->pwrite; +} + +/* Cleanup when finished reading (either due to error or in the success case). + */ +static void +store_read_reset(png_store *ps) +{ + if (ps->pread != NULL) + { + anon_context(ps); + + Try + png_destroy_read_struct(&ps->pread, &ps->piread, NULL); + + Catch_anonymous + { + /* error already output: continue */ + } + + ps->pread = NULL; + ps->piread = NULL; + } + + /* Always do this to be safe. */ + store_pool_delete(ps, &ps->read_memory_pool); + + ps->current = NULL; + ps->next = NULL; + ps->readpos = 0; + ps->validated = 0; +} + +static void +store_read_set(png_store *ps, png_uint_32 id) +{ + png_store_file *pf = ps->saved; + + while (pf != NULL) + { + if (pf->id == id) + { + ps->current = pf; + ps->next = NULL; + store_read_buffer_next(ps); + return; + } + + pf = pf->next; + } + + { + size_t pos; + char msg[FILE_NAME_SIZE+64]; + + pos = standard_name_from_id(msg, sizeof msg, 0, id); + pos = safecat(msg, sizeof msg, pos, ": file not found"); + png_error(ps->pread, msg); + } +} + +/* The main interface for reading a saved file - pass the id number of the file + * to retrieve. Ids must be unique or the earlier file will be hidden. The API + * returns a png_struct and, optionally, a png_info. Both of these will be + * destroyed by store_read_reset above. + */ +static png_structp +set_store_for_read(png_store *ps, png_infopp ppi, png_uint_32 id, + PNG_CONST char *name) +{ + /* Set the name for png_error */ + safecat(ps->test, sizeof ps->test, 0, name); + + if (ps->pread != NULL) + png_error(ps->pread, "read store already in use"); + + store_read_reset(ps); + + /* Both the create APIs can return NULL if used in their default mode + * (because there is no other way of handling an error because the jmp_buf + * by default is stored in png_struct and that has not been allocated!) + * However, given that store_error works correctly in these circumstances + * we don't ever expect NULL in this program. + */ + if (ps->speed) + ps->pread = png_create_read_struct(PNG_LIBPNG_VER_STRING, ps, + store_error, store_warning); + + else + ps->pread = png_create_read_struct_2(PNG_LIBPNG_VER_STRING, ps, + store_error, store_warning, &ps->read_memory_pool, store_malloc, + store_free); + + if (ps->pread == NULL) + { + struct exception_context *the_exception_context = &ps->exception_context; + + store_log(ps, NULL, "png_create_read_struct returned NULL (unexpected)", + 1 /*error*/); + + Throw ps; + } + + store_read_set(ps, id); + + if (ppi != NULL) + *ppi = ps->piread = png_create_info_struct(ps->pread); + + return ps->pread; +} + +/* The overall cleanup of a store simply calls the above then removes all the + * saved files. This does not delete the store itself. + */ +static void +store_delete(png_store *ps) +{ + store_write_reset(ps); + store_read_reset(ps); + store_freefile(&ps->saved); + + if (ps->image != NULL) + { + free(ps->image-1); + ps->image = NULL; + ps->cb_image = 0; + } +} + +/*********************** PNG FILE MODIFICATION ON READ ************************/ +/* Files may be modified on read. The following structure contains a complete + * png_store together with extra members to handle modification and a special + * read callback for libpng. To use this the 'modifications' field must be set + * to a list of png_modification structures that actually perform the + * modification, otherwise a png_modifier is functionally equivalent to a + * png_store. There is a special read function, set_modifier_for_read, which + * replaces set_store_for_read. + */ +typedef struct png_modifier +{ + png_store this; /* I am a png_store */ + struct png_modification *modifications; /* Changes to make */ + + enum modifier_state + { + modifier_start, /* Initial value */ + modifier_signature, /* Have a signature */ + modifier_IHDR /* Have an IHDR */ + } state; /* My state */ + + /* Information from IHDR: */ + png_byte bit_depth; /* From IHDR */ + png_byte colour_type; /* From IHDR */ + + /* While handling PLTE, IDAT and IEND these chunks may be pended to allow + * other chunks to be inserted. + */ + png_uint_32 pending_len; + png_uint_32 pending_chunk; + + /* Test values */ + double *gammas; + unsigned int ngammas; + + /* Lowest sbit to test (libpng fails for sbit < 8) */ + png_byte sbitlow; + + /* Error control - these are the limits on errors accepted by the gamma tests + * below. + */ + double maxout8; /* Maximum output value error */ + double maxabs8; /* Absolute sample error 0..1 */ + double maxpc8; /* Percentage sample error 0..100% */ + double maxout16; /* Maximum output value error */ + double maxabs16; /* Absolute sample error 0..1 */ + double maxpc16; /* Percentage sample error 0..100% */ + + /* Logged 8 and 16 bit errors ('output' values): */ + double error_gray_2; + double error_gray_4; + double error_gray_8; + double error_gray_16; + double error_color_8; + double error_color_16; + + /* Flags: */ + /* Whether or not to interlace. */ + int interlace_type :9; /* int, but must store '1' */ + + /* Run the standard tests? */ + unsigned int test_standard :1; + + /* Run the odd-sized image and interlace read/write tests? */ + unsigned int test_size :1; + + /* Run tests on reading with a combiniation of transforms, */ + unsigned int test_transform :1; + + /* When to use the use_input_precision option: */ + unsigned int use_input_precision :1; + unsigned int use_input_precision_sbit :1; + unsigned int use_input_precision_16to8 :1; + + /* Which gamma tests to run: */ + unsigned int test_gamma_threshold :1; + unsigned int test_gamma_transform :1; /* main tests */ + unsigned int test_gamma_sbit :1; + unsigned int test_gamma_strip16 :1; + + unsigned int log :1; /* Log max error */ + + /* Buffer information, the buffer size limits the size of the chunks that can + * be modified - they must fit (including header and CRC) into the buffer! + */ + size_t flush; /* Count of bytes to flush */ + size_t buffer_count; /* Bytes in buffer */ + size_t buffer_position; /* Position in buffer */ + png_byte buffer[1024]; +} png_modifier; + +static double abserr(png_modifier *pm, png_byte bit_depth) +{ + return bit_depth == 16 ? pm->maxabs16 : pm->maxabs8; +} + +static double pcerr(png_modifier *pm, png_byte bit_depth) +{ + return (bit_depth == 16 ? pm->maxpc16 : pm->maxpc8) * .01; +} + +static double outerr(png_modifier *pm, png_byte bit_depth) +{ + /* There is a serious error in the 2 and 4 bit grayscale transform because + * the gamma table value (8 bits) is simply shifted, not rounded, so the + * error in 4 bit greyscale gamma is up to the value below. This is a hack + * to allow pngvalid to succeed: + */ + if (bit_depth == 2) + return .73182-.5; + + if (bit_depth == 4) + return .90644-.5; + + if (bit_depth == 16) + return pm->maxout16; + + return pm->maxout8; +} + +/* This returns true if the test should be stopped now because it has already + * failed and it is running silently. + */ +static int fail(png_modifier *pm) +{ + return !pm->log && !pm->this.verbose && (pm->this.nerrors > 0 || + (pm->this.treat_warnings_as_errors && pm->this.nwarnings > 0)); +} + +static void +modifier_init(png_modifier *pm) +{ + memset(pm, 0, sizeof *pm); + store_init(&pm->this); + pm->modifications = NULL; + pm->state = modifier_start; + pm->sbitlow = 1U; + pm->maxout8 = pm->maxpc8 = pm->maxabs8 = 0; + pm->maxout16 = pm->maxpc16 = pm->maxabs16 = 0; + pm->error_gray_2 = pm->error_gray_4 = pm->error_gray_8 = 0; + pm->error_gray_16 = pm->error_color_8 = pm->error_color_16 = 0; + pm->interlace_type = PNG_INTERLACE_NONE; + pm->test_standard = 0; + pm->test_size = 0; + pm->test_transform = 0; + pm->use_input_precision = 0; + pm->use_input_precision_sbit = 0; + pm->use_input_precision_16to8 = 0; + pm->test_gamma_threshold = 0; + pm->test_gamma_transform = 0; + pm->test_gamma_sbit = 0; + pm->test_gamma_strip16 = 0; + pm->log = 0; + + /* Rely on the memset for all the other fields - there are no pointers */ +} + +/* One modification structure must be provided for each chunk to be modified (in + * fact more than one can be provided if multiple separate changes are desired + * for a single chunk.) Modifications include adding a new chunk when a + * suitable chunk does not exist. + * + * The caller of modify_fn will reset the CRC of the chunk and record 'modified' + * or 'added' as appropriate if the modify_fn returns 1 (true). If the + * modify_fn is NULL the chunk is simply removed. + */ +typedef struct png_modification +{ + struct png_modification *next; + png_uint_32 chunk; + + /* If the following is NULL all matching chunks will be removed: */ + int (*modify_fn)(struct png_modifier *pm, + struct png_modification *me, int add); + + /* If the following is set to PLTE, IDAT or IEND and the chunk has not been + * found and modified (and there is a modify_fn) the modify_fn will be called + * to add the chunk before the relevant chunk. + */ + png_uint_32 add; + unsigned int modified :1; /* Chunk was modified */ + unsigned int added :1; /* Chunk was added */ + unsigned int removed :1; /* Chunk was removed */ +} png_modification; + +static void modification_reset(png_modification *pmm) +{ + if (pmm != NULL) + { + pmm->modified = 0; + pmm->added = 0; + pmm->removed = 0; + modification_reset(pmm->next); + } +} + +static void +modification_init(png_modification *pmm) +{ + memset(pmm, 0, sizeof *pmm); + pmm->next = NULL; + pmm->chunk = 0; + pmm->modify_fn = NULL; + pmm->add = 0; + modification_reset(pmm); +} + +static void +modifier_reset(png_modifier *pm) +{ + store_read_reset(&pm->this); + pm->modifications = NULL; + pm->state = modifier_start; + pm->bit_depth = pm->colour_type = 0; + pm->pending_len = pm->pending_chunk = 0; + pm->flush = pm->buffer_count = pm->buffer_position = 0; +} + +/* Convenience macros. */ +#define CHUNK(a,b,c,d) (((a)<<24)+((b)<<16)+((c)<<8)+(d)) +#define CHUNK_IHDR CHUNK(73,72,68,82) +#define CHUNK_PLTE CHUNK(80,76,84,69) +#define CHUNK_IDAT CHUNK(73,68,65,84) +#define CHUNK_IEND CHUNK(73,69,78,68) +#define CHUNK_cHRM CHUNK(99,72,82,77) +#define CHUNK_gAMA CHUNK(103,65,77,65) +#define CHUNK_sBIT CHUNK(115,66,73,84) +#define CHUNK_sRGB CHUNK(115,82,71,66) + +/* The guts of modification are performed during a read. */ +static void +modifier_crc(png_bytep buffer) +{ + /* Recalculate the chunk CRC - a complete chunk must be in + * the buffer, at the start. + */ + uInt datalen = png_get_uint_32(buffer); + png_save_uint_32(buffer+datalen+8, crc32(0L, buffer+4, datalen+4)); +} + +static void +modifier_setbuffer(png_modifier *pm) +{ + modifier_crc(pm->buffer); + pm->buffer_count = png_get_uint_32(pm->buffer)+12; + pm->buffer_position = 0; +} + +/* Separate the callback into the actual implementation (which is passed the + * png_modifier explicitly) and the callback, which gets the modifier from the + * png_struct. + */ +static void +modifier_read_imp(png_modifier *pm, png_bytep pb, png_size_t st) +{ + while (st > 0) + { + size_t cb; + png_uint_32 len, chunk; + png_modification *mod; + + if (pm->buffer_position >= pm->buffer_count) switch (pm->state) + { + static png_byte sign[8] = { 137, 80, 78, 71, 13, 10, 26, 10 }; + case modifier_start: + store_read_imp(&pm->this, pm->buffer, 8); /* size of signature. */ + pm->buffer_count = 8; + pm->buffer_position = 0; + + if (memcmp(pm->buffer, sign, 8) != 0) + png_error(pm->this.pread, "invalid PNG file signature"); + pm->state = modifier_signature; + break; + + case modifier_signature: + store_read_imp(&pm->this, pm->buffer, 13+12); /* size of IHDR */ + pm->buffer_count = 13+12; + pm->buffer_position = 0; + + if (png_get_uint_32(pm->buffer) != 13 || + png_get_uint_32(pm->buffer+4) != CHUNK_IHDR) + png_error(pm->this.pread, "invalid IHDR"); + + /* Check the list of modifiers for modifications to the IHDR. */ + mod = pm->modifications; + while (mod != NULL) + { + if (mod->chunk == CHUNK_IHDR && mod->modify_fn && + (*mod->modify_fn)(pm, mod, 0)) + { + mod->modified = 1; + modifier_setbuffer(pm); + } + + /* Ignore removal or add if IHDR! */ + mod = mod->next; + } + + /* Cache information from the IHDR (the modified one.) */ + pm->bit_depth = pm->buffer[8+8]; + pm->colour_type = pm->buffer[8+8+1]; + + pm->state = modifier_IHDR; + pm->flush = 0; + break; + + case modifier_IHDR: + default: + /* Read a new chunk and process it until we see PLTE, IDAT or + * IEND. 'flush' indicates that there is still some data to + * output from the preceding chunk. + */ + if ((cb = pm->flush) > 0) + { + if (cb > st) cb = st; + pm->flush -= cb; + store_read_imp(&pm->this, pb, cb); + pb += cb; + st -= cb; + if (st <= 0) return; + } + + /* No more bytes to flush, read a header, or handle a pending + * chunk. + */ + if (pm->pending_chunk != 0) + { + png_save_uint_32(pm->buffer, pm->pending_len); + png_save_uint_32(pm->buffer+4, pm->pending_chunk); + pm->pending_len = 0; + pm->pending_chunk = 0; + } + else + store_read_imp(&pm->this, pm->buffer, 8); + + pm->buffer_count = 8; + pm->buffer_position = 0; + + /* Check for something to modify or a terminator chunk. */ + len = png_get_uint_32(pm->buffer); + chunk = png_get_uint_32(pm->buffer+4); + + /* Terminators first, they may have to be delayed for added + * chunks + */ + if (chunk == CHUNK_PLTE || chunk == CHUNK_IDAT || + chunk == CHUNK_IEND) + { + mod = pm->modifications; + + while (mod != NULL) + { + if ((mod->add == chunk || + (mod->add == CHUNK_PLTE && chunk == CHUNK_IDAT)) && + mod->modify_fn != NULL && !mod->modified && !mod->added) + { + /* Regardless of what the modify function does do not run + * this again. + */ + mod->added = 1; + + if ((*mod->modify_fn)(pm, mod, 1 /*add*/)) + { + /* Reset the CRC on a new chunk */ + if (pm->buffer_count > 0) + modifier_setbuffer(pm); + + else + { + pm->buffer_position = 0; + mod->removed = 1; + } + + /* The buffer has been filled with something (we assume) + * so output this. Pend the current chunk. + */ + pm->pending_len = len; + pm->pending_chunk = chunk; + break; /* out of while */ + } + } + + mod = mod->next; + } + + /* Don't do any further processing if the buffer was modified - + * otherwise the code will end up modifying a chunk that was + * just added. + */ + if (mod != NULL) + break; /* out of switch */ + } + + /* If we get to here then this chunk may need to be modified. To + * do this it must be less than 1024 bytes in total size, otherwise + * it just gets flushed. + */ + if (len+12 <= sizeof pm->buffer) + { + store_read_imp(&pm->this, pm->buffer+pm->buffer_count, + len+12-pm->buffer_count); + pm->buffer_count = len+12; + + /* Check for a modification, else leave it be. */ + mod = pm->modifications; + while (mod != NULL) + { + if (mod->chunk == chunk) + { + if (mod->modify_fn == NULL) + { + /* Remove this chunk */ + pm->buffer_count = pm->buffer_position = 0; + mod->removed = 1; + break; /* Terminate the while loop */ + } + + else if ((*mod->modify_fn)(pm, mod, 0)) + { + mod->modified = 1; + /* The chunk may have been removed: */ + if (pm->buffer_count == 0) + { + pm->buffer_position = 0; + break; + } + modifier_setbuffer(pm); + } + } + + mod = mod->next; + } + } + + else + pm->flush = len+12 - pm->buffer_count; /* data + crc */ + + /* Take the data from the buffer (if there is any). */ + break; + } + + /* Here to read from the modifier buffer (not directly from + * the store, as in the flush case above.) + */ + cb = pm->buffer_count - pm->buffer_position; + + if (cb > st) + cb = st; + + memcpy(pb, pm->buffer + pm->buffer_position, cb); + st -= cb; + pb += cb; + pm->buffer_position += cb; + } +} + +/* The callback: */ +static void +modifier_read(png_structp pp, png_bytep pb, png_size_t st) +{ + png_modifier *pm = png_get_io_ptr(pp); + + if (pm == NULL || pm->this.pread != pp) + png_error(pp, "bad modifier_read call"); + + modifier_read_imp(pm, pb, st); +} + +/* Like store_progressive_read but the data is getting changed as we go so we + * need a local buffer. + */ +static void +modifier_progressive_read(png_modifier *pm, png_structp pp, png_infop pi) +{ + if (pm->this.pread != pp || pm->this.current == NULL || + pm->this.next == NULL) + png_error(pp, "store state damaged (progressive)"); + + /* This is another Horowitz and Hill random noise generator. In this case + * the aim is to stress the progressive reader with truely horrible variable + * buffer sizes in the range 1..500, so a sequence of 9 bit random numbers + * is generated. We could probably just count from 1 to 32767 and get as + * good a result. + */ + for (;;) + { + static png_uint_32 noise = 1; + png_size_t cb, cbAvail; + png_byte buffer[512]; + + /* Generate 15 more bits of stuff: */ + noise = (noise << 9) | ((noise ^ (noise >> (9-5))) & 0x1ff); + cb = noise & 0x1ff; + + /* Check that this number of bytes are available (in the current buffer.) + * (This doesn't quite work - the modifier might delete a chunk; unlikely + * but possible, it doesn't happen at present because the modifier only + * adds chunks to standard images.) + */ + cbAvail = store_read_buffer_avail(&pm->this); + if (pm->buffer_count > pm->buffer_position) + cbAvail += pm->buffer_count - pm->buffer_position; + + if (cb > cbAvail) + { + /* Check for EOF: */ + if (cbAvail == 0) + break; + + cb = cbAvail; + } + + modifier_read_imp(pm, buffer, cb); + png_process_data(pp, pi, buffer, cb); + } + + /* Check the invariants at the end (if this fails it's a problem in this + * file!) + */ + if (pm->buffer_count > pm->buffer_position || + pm->this.next != &pm->this.current->data || + pm->this.readpos < pm->this.current->datacount) + png_error(pp, "progressive read implementation error"); +} + +/* Set up a modifier. */ +static png_structp +set_modifier_for_read(png_modifier *pm, png_infopp ppi, png_uint_32 id, + PNG_CONST char *name) +{ + /* Do this first so that the modifier fields are cleared even if an error + * happens allocating the png_struct. No allocation is done here so no + * cleanup is required. + */ + pm->state = modifier_start; + pm->bit_depth = 0; + pm->colour_type = 255; + + pm->pending_len = 0; + pm->pending_chunk = 0; + pm->flush = 0; + pm->buffer_count = 0; + pm->buffer_position = 0; + + return set_store_for_read(&pm->this, ppi, id, name); +} + +/***************************** STANDARD PNG FILES *****************************/ +/* Standard files - write and save standard files. */ +/* There are two basic forms of standard images. Those which attempt to have + * all the possible pixel values (not possible for 16bpp images, but a range of + * values are produced) and those which have a range of image sizes. The former + * are used for testing transforms, in particular gamma correction and bit + * reduction and increase. The latter are reserved for testing the behavior of + * libpng with respect to 'odd' image sizes - particularly small images where + * rows become 1 byte and interlace passes disappear. + * + * The first, most useful, set are the 'transform' images, the second set of + * small images are the 'size' images. + * + * The transform files are constructed with rows which fit into a 1024 byte row + * buffer. This makes allocation easier below. Further regardless of the file + * format every row has 128 pixels (giving 1024 bytes for 64bpp formats). + * + * Files are stored with no gAMA or sBIT chunks, with a PLTE only when needed + * and with an ID derived from the colour type, bit depth and interlace type + * as above (FILEID). The width (128) and height (variable) are not stored in + * the FILEID - instead the fields are set to 0, indicating a transform file. + * + * The size files ar constructed with rows a maximum of 128 bytes wide, allowing + * a maximum width of 16 pixels (for the 64bpp case.) They also have a maximum + * height of 16 rows. The width and height are stored in the FILEID and, being + * non-zero, indicate a size file. + */ + +/* The number of passes is related to the interlace type. There wass no libpng + * API to determine this prior to 1.5, so we need an inquiry function: + */ +static int +npasses_from_interlace_type(png_structp pp, int interlace_type) +{ + switch (interlace_type) + { + default: + png_error(pp, "invalid interlace type"); + + case PNG_INTERLACE_NONE: + return 1; + + case PNG_INTERLACE_ADAM7: + return PNG_INTERLACE_ADAM7_PASSES; + } +} + +static unsigned int +bit_size(png_structp pp, png_byte colour_type, png_byte bit_depth) +{ + switch (colour_type) + { + case 0: return bit_depth; + + case 2: return 3*bit_depth; + + case 3: return bit_depth; + + case 4: return 2*bit_depth; + + case 6: return 4*bit_depth; + + default: png_error(pp, "invalid color type"); + } +} + +#define TRANSFORM_WIDTH 128U +#define TRANSFORM_ROWMAX (TRANSFORM_WIDTH*8U) +#define SIZE_ROWMAX (16*8U) /* 16 pixels, max 8 bytes each - 128 bytes */ +#define STANDARD_ROWMAX TRANSFORM_ROWMAX /* The larger of the two */ + +/* So the maximum image sizes are as follows. A 'transform' image may require + * more than 65535 bytes. The size images are a maximum of 2046 bytes. + */ +#define TRANSFORM_IMAGEMAX (TRANSFORM_ROWMAX * (png_uint_32)2048) +#define SIZE_IMAGEMAX (SIZE_ROWMAX * 16U) + +static size_t +transform_rowsize(png_structp pp, png_byte colour_type, png_byte bit_depth) +{ + return (TRANSFORM_WIDTH * bit_size(pp, colour_type, bit_depth)) / 8; +} + +/* transform_width(pp, colour_type, bit_depth) current returns the same number + * every time, so just use a macro: + */ +#define transform_width(pp, colour_type, bit_depth) TRANSFORM_WIDTH + +static png_uint_32 +transform_height(png_structp pp, png_byte colour_type, png_byte bit_depth) +{ + switch (bit_size(pp, colour_type, bit_depth)) + { + case 1: + case 2: + case 4: + return 1; /* Total of 128 pixels */ + + case 8: + return 2; /* Total of 256 pixels/bytes */ + + case 16: + return 512; /* Total of 65536 pixels */ + + case 24: + case 32: + return 512; /* 65536 pixels */ + + case 48: + case 64: + return 2048;/* 4 x 65536 pixels. */ + + default: + return 0; /* Error, will be caught later */ + } +} + +/* The following can only be defined here, now we have the definitions + * of the transform image sizes. + */ +static png_uint_32 +standard_width(png_structp pp, png_uint_32 id) +{ + png_uint_32 width = WIDTH_FROM_ID(id); + UNUSED(pp) + + if (width == 0) + width = transform_width(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); + + return width; +} + +static png_uint_32 +standard_height(png_structp pp, png_uint_32 id) +{ + png_uint_32 height = HEIGHT_FROM_ID(id); + + if (height == 0) + height = transform_height(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); + + return height; +} + +static png_uint_32 +standard_rowsize(png_structp pp, png_uint_32 id) +{ + png_uint_32 width = standard_width(pp, id); + + /* This won't overflow: */ + width *= bit_size(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); + return (width + 7) / 8; +} + +static void +transform_row(png_structp pp, png_byte buffer[TRANSFORM_ROWMAX], + png_byte colour_type, png_byte bit_depth, png_uint_32 y) +{ + png_uint_32 v = y << 7; + png_uint_32 i = 0; + + switch (bit_size(pp, colour_type, bit_depth)) + { + case 1: + while (i<128/8) buffer[i] = v & 0xff, v += 17, ++i; + return; + + case 2: + while (i<128/4) buffer[i] = v & 0xff, v += 33, ++i; + return; + + case 4: + while (i<128/2) buffer[i] = v & 0xff, v += 65, ++i; + return; + + case 8: + /* 256 bytes total, 128 bytes in each row set as follows: */ + while (i<128) buffer[i] = v & 0xff, ++v, ++i; + return; + + case 16: + /* Generate all 65536 pixel values in order, which includes the 8 bit + * GA case as well as the 16 bit G case. + */ + while (i<128) + buffer[2*i] = (v>>8) & 0xff, buffer[2*i+1] = v & 0xff, ++v, ++i; + + return; + + case 24: + /* 65535 pixels, but rotate the values. */ + while (i<128) + { + /* Three bytes per pixel, r, g, b, make b by r^g */ + buffer[3*i+0] = (v >> 8) & 0xff; + buffer[3*i+1] = v & 0xff; + buffer[3*i+2] = ((v >> 8) ^ v) & 0xff; + ++v; + ++i; + } + + return; + + case 32: + /* 65535 pixels, r, g, b, a; just replicate */ + while (i<128) + { + buffer[4*i+0] = (v >> 8) & 0xff; + buffer[4*i+1] = v & 0xff; + buffer[4*i+2] = (v >> 8) & 0xff; + buffer[4*i+3] = v & 0xff; + ++v; + ++i; + } + + return; + + case 48: + /* y is maximum 2047, giving 4x65536 pixels, make 'r' increase by 1 at + * each pixel, g increase by 257 (0x101) and 'b' by 0x1111: + */ + while (i<128) + { + png_uint_32 t = v++; + buffer[6*i+0] = (t >> 8) & 0xff; + buffer[6*i+1] = t & 0xff; + t *= 257; + buffer[6*i+2] = (t >> 8) & 0xff; + buffer[6*i+3] = t & 0xff; + t *= 17; + buffer[6*i+4] = (t >> 8) & 0xff; + buffer[6*i+5] = t & 0xff; + ++i; + } + + return; + + case 64: + /* As above in the 32 bit case. */ + while (i<128) + { + png_uint_32 t = v++; + buffer[8*i+0] = (t >> 8) & 0xff; + buffer[8*i+1] = t & 0xff; + buffer[8*i+4] = (t >> 8) & 0xff; + buffer[8*i+5] = t & 0xff; + t *= 257; + buffer[8*i+2] = (t >> 8) & 0xff; + buffer[8*i+3] = t & 0xff; + buffer[8*i+6] = (t >> 8) & 0xff; + buffer[8*i+7] = t & 0xff; + ++i; + } + return; + + default: + break; + } + + png_error(pp, "internal error"); +} + +/* This is just to do the right cast - could be changed to a function to check + * 'bd' but there isn't much point. + */ +#define DEPTH(bd) ((png_byte)(1U << (bd))) + +/* Make a standardized image given a an image colour type, bit depth and + * interlace type. The standard images have a very restricted range of + * rows and heights and are used for testing transforms rather than image + * layout details. See make_size_images below for a way to make images + * that test odd sizes along with the libpng interlace handling. + */ +static void +make_transform_image(png_store* PNG_CONST ps, png_byte PNG_CONST colour_type, + png_byte PNG_CONST bit_depth, int interlace_type, png_const_charp name) +{ + context(ps, fault); + + Try + { + png_infop pi; + png_structp pp = set_store_for_write(ps, &pi, name); + png_uint_32 h; + + /* In the event of a problem return control to the Catch statement below + * to do the clean up - it is not possible to 'return' directly from a Try + * block. + */ + if (pp == NULL) + Throw ps; + + h = transform_height(pp, colour_type, bit_depth); + + png_set_IHDR(pp, pi, transform_width(pp, colour_type, bit_depth), h, + bit_depth, colour_type, interlace_type, + PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); + + if (colour_type == 3) /* palette */ + { + unsigned int i = 0; + png_color pal[256]; + + do + pal[i].red = pal[i].green = pal[i].blue = (png_byte)i; + while(++i < 256U); + + png_set_PLTE(pp, pi, pal, 256); + } + + png_write_info(pp, pi); + + if (png_get_rowbytes(pp, pi) != + transform_rowsize(pp, colour_type, bit_depth)) + png_error(pp, "row size incorrect"); + + else + { + /* Somewhat confusingly this must be called *after* png_write_info + * because if it is called before, the information in *pp has not been + * updated to reflect the interlaced image. + */ + int npasses = png_set_interlace_handling(pp); + int pass; + + if (npasses != npasses_from_interlace_type(pp, interlace_type)) + png_error(pp, "write: png_set_interlace_handling failed"); + + for (pass=0; passtest, sizeof ps->test, 0, "make standard images"); + + /* Arguments are colour_type, low bit depth, high bit depth + */ + make_standard(ps, 0, 0, WRITE_BDHI); + make_standard(ps, 2, 3, WRITE_BDHI); + make_standard(ps, 3, 0, 3 /*palette: max 8 bits*/); + make_standard(ps, 4, 3, WRITE_BDHI); + make_standard(ps, 6, 3, WRITE_BDHI); +} + +/* The following two routines use the PNG interlace support macros from + * png.h to interlace or deinterlace rows. + */ +static void +interlace_row(png_bytep buffer, png_const_bytep imageRow, + unsigned int pixel_size, png_uint_32 w, int pass) +{ + png_uint_32 xin, xout, xstep; + + /* Note that this can, trivially, be optimized to a memcpy on pass 7, the + * code is presented this way to make it easier to understand. In practice + * consult the code in the libpng source to see other ways of doing this. + */ + xin = PNG_PASS_START_COL(pass); + xstep = 1U<= 8) + *buffer++ = (png_byte)y++, bit_width -= 8; + + /* There may be up to 7 remaining bits, these go in the most significant + * bits of the byte. + */ + if (bit_width > 0) + { + png_uint_32 mask = (1U<<(8-bit_width))-1; + *buffer = (png_byte)((*buffer & mask) | (y & ~mask)); + } +} + +static void +make_size_image(png_store* PNG_CONST ps, png_byte PNG_CONST colour_type, + png_byte PNG_CONST bit_depth, int PNG_CONST interlace_type, + png_uint_32 PNG_CONST w, png_uint_32 PNG_CONST h, + int PNG_CONST do_interlace) +{ + context(ps, fault); + + Try + { + png_infop pi; + png_structp pp; + unsigned int pixel_size; + + /* Make a name and get an appropriate id for the store: */ + char name[FILE_NAME_SIZE]; + PNG_CONST png_uint_32 id = FILEID(colour_type, bit_depth, interlace_type, + w, h, do_interlace); + + standard_name_from_id(name, sizeof name, 0, id); + pp = set_store_for_write(ps, &pi, name); + + /* In the event of a problem return control to the Catch statement below + * to do the clean up - it is not possible to 'return' directly from a Try + * block. + */ + if (pp == NULL) + Throw ps; + + png_set_IHDR(pp, pi, w, h, bit_depth, colour_type, interlace_type, + PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); + + /* Same palette as make_transform_image - I don' think there is any + * benefit from using a different one (JB 20101211) + */ + if (colour_type == 3) /* palette */ + { + unsigned int i = 0; + png_color pal[256]; + + do + pal[i].red = pal[i].green = pal[i].blue = (png_byte)i; + while(++i < 256U); + + png_set_PLTE(pp, pi, pal, 256); + } + + png_write_info(pp, pi); + + /* Calculate the bit size, divide by 8 to get the byte size - this won't + * overflow because we know the w values are all small enough even for + * a system where 'unsigned int' is only 16 bits. + */ + pixel_size = bit_size(pp, colour_type, bit_depth); + if (png_get_rowbytes(pp, pi) != ((w * pixel_size) + 7) / 8) + png_error(pp, "row size incorrect"); + + else + { + int npasses = npasses_from_interlace_type(pp, interlace_type); + png_uint_32 y; + int pass; + png_byte image[16][SIZE_ROWMAX]; + + /* To help consistent error detection make the parts of this buffer + * that aren't set below all '1': + */ + memset(image, 0xff, sizeof image); + + if (!do_interlace && npasses != png_set_interlace_handling(pp)) + png_error(pp, "write: png_set_interlace_handling failed"); + + /* Prepare the whole image first to avoid making it 7 times: */ + for (y=0; y 0) + { + /* Set to all 1's for error detection (libpng tends to + * set unset things to 0). + */ + memset(tempRow, 0xff, sizeof tempRow); + interlace_row(tempRow, row, pixel_size, w, pass); + row = tempRow; + } + else + continue; + } + + /* Only get to here if the row has some pixels in it. */ + png_write_row(pp, row); + } + } + } + + png_write_end(pp, pi); + + /* And store this under the appropriate id, then clean up. */ + store_storefile(ps, id); + + store_write_reset(ps); + } + + Catch(fault) + { + /* Use the png_store returned by the exception. This may help the compiler + * because 'ps' is not used in this branch of the setjmp. Note that fault + * and ps will always be the same value. + */ + store_write_reset(fault); + } +} + +static void +make_size(png_store* PNG_CONST ps, png_byte PNG_CONST colour_type, int bdlo, + int PNG_CONST bdhi) +{ + for (; bdlo <= bdhi; ++bdlo) + { + png_uint_32 width; + + for (width = 1; width <= 16; ++width) + { + png_uint_32 height; + + for (height = 1; height <= 16; ++height) + { + /* The four combinations of DIY interlace and interlace or not - + * no interlace + DIY should be identical to no interlace with + * libpng doing it. + */ + make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_NONE, + width, height, 0); + make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_NONE, + width, height, 1); + make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_ADAM7, + width, height, 0); + make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_ADAM7, + width, height, 1); + } + } + } +} + +static void +make_size_images(png_store *ps) +{ + /* This is in case of errors. */ + safecat(ps->test, sizeof ps->test, 0, "make size images"); + + /* Arguments are colour_type, low bit depth, high bit depth + */ + make_size(ps, 0, 0, WRITE_BDHI); + make_size(ps, 2, 3, WRITE_BDHI); + make_size(ps, 3, 0, 3 /*palette: max 8 bits*/); + make_size(ps, 4, 3, WRITE_BDHI); + make_size(ps, 6, 3, WRITE_BDHI); +} + +/* Return a row based on image id and 'y' for checking: */ +static void +standard_row(png_structp pp, png_byte std[STANDARD_ROWMAX], png_uint_32 id, + png_uint_32 y) +{ + if (WIDTH_FROM_ID(id) == 0) + transform_row(pp, std, COL_FROM_ID(id), DEPTH_FROM_ID(id), y); + else + size_row(std, WIDTH_FROM_ID(id) * bit_size(pp, COL_FROM_ID(id), + DEPTH_FROM_ID(id)), y); +} + +/* Tests - individual test cases */ +/* Like 'make_standard' but errors are deliberately introduced into the calls + * to ensure that they get detected - it should not be possible to write an + * invalid image with libpng! + */ +static void +sBIT0_error_fn(png_structp pp, png_infop pi) +{ + /* 0 is invalid... */ + png_color_8 bad; + bad.red = bad.green = bad.blue = bad.gray = bad.alpha = 0; + png_set_sBIT(pp, pi, &bad); +} + +static void +sBIT_error_fn(png_structp pp, png_infop pi) +{ + png_byte bit_depth; + png_color_8 bad; + + if (png_get_color_type(pp, pi) == PNG_COLOR_TYPE_PALETTE) + bit_depth = 8; + + else + bit_depth = png_get_bit_depth(pp, pi); + + /* Now we know the bit depth we can easily generate an invalid sBIT entry */ + bad.red = bad.green = bad.blue = bad.gray = bad.alpha = + (png_byte)(bit_depth+1); + png_set_sBIT(pp, pi, &bad); +} + +static PNG_CONST struct +{ + void (*fn)(png_structp, png_infop); + PNG_CONST char *msg; + unsigned int warning :1; /* the error is a warning... */ +} error_test[] = + { + { sBIT0_error_fn, "sBIT(0): failed to detect error", 1 }, + { sBIT_error_fn, "sBIT(too big): failed to detect error", 1 }, + }; + +static void +make_error(png_store* volatile ps, png_byte PNG_CONST colour_type, + png_byte bit_depth, int interlace_type, int test, png_const_charp name) +{ + context(ps, fault); + + Try + { + png_structp pp; + png_infop pi; + + pp = set_store_for_write(ps, &pi, name); + + if (pp == NULL) + Throw ps; + + png_set_IHDR(pp, pi, transform_width(pp, colour_type, bit_depth), + transform_height(pp, colour_type, bit_depth), bit_depth, colour_type, + interlace_type, PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); + + if (colour_type == 3) /* palette */ + { + unsigned int i = 0; + png_color pal[256]; + + do + pal[i].red = pal[i].green = pal[i].blue = (png_byte)i; + while(++i < 256U); + + png_set_PLTE(pp, pi, pal, 256); + } + + /* Time for a few errors, these are in various optional chunks, the + * standard tests test the standard chunks pretty well. + */ +# define exception__prev exception_prev_1 +# define exception__env exception_env_1 + Try + { + /* Expect this to throw: */ + ps->expect_error = !error_test[test].warning; + ps->expect_warning = error_test[test].warning; + ps->saw_warning = 0; + error_test[test].fn(pp, pi); + + /* Normally the error is only detected here: */ + png_write_info(pp, pi); + + /* And handle the case where it was only a warning: */ + if (ps->expect_warning && ps->saw_warning) + Throw ps; + + /* If we get here there is a problem, we have success - no error or + * no warning - when we shouldn't have success. Log an error. + */ + store_log(ps, pp, error_test[test].msg, 1 /*error*/); + } + + Catch (fault) + ps = fault; /* expected exit, make sure ps is not clobbered */ +#undef exception__prev +#undef exception__env + + /* And clear these flags */ + ps->expect_error = 0; + ps->expect_warning = 0; + + /* Now write the whole image, just to make sure that the detected, or + * undetected, errro has not created problems inside libpng. + */ + if (png_get_rowbytes(pp, pi) != + transform_rowsize(pp, colour_type, bit_depth)) + png_error(pp, "row size incorrect"); + + else + { + png_uint_32 h = transform_height(pp, colour_type, bit_depth); + int npasses = png_set_interlace_handling(pp); + int pass; + + if (npasses != npasses_from_interlace_type(pp, interlace_type)) + png_error(pp, "write: png_set_interlace_handling failed"); + + for (pass=0; passthis, colour_type, DEPTH(bdlo), interlace_type, + test, name); + + if (fail(pm)) + return 0; + } + } + } + + return 1; /* keep going */ +} + +static void +perform_error_test(png_modifier *pm) +{ + /* Need to do this here because we just write in this test. */ + safecat(pm->this.test, sizeof pm->this.test, 0, "error test"); + + if (!make_errors(pm, 0, 0, WRITE_BDHI)) + return; + + if (!make_errors(pm, 2, 3, WRITE_BDHI)) + return; + + if (!make_errors(pm, 3, 0, 3)) + return; + + if (!make_errors(pm, 4, 3, WRITE_BDHI)) + return; + + if (!make_errors(pm, 6, 3, WRITE_BDHI)) + return; +} + +/* Because we want to use the same code in both the progressive reader and the + * sequential reader it is necessary to deal with the fact that the progressive + * reader callbacks only have one parameter (png_get_progressive_ptr()), so this + * must contain all the test parameters and all the local variables directly + * accessible to the sequential reader implementation. + * + * The technique adopted is to reinvent part of what Dijkstra termed a + * 'display'; an array of pointers to the stack frames of enclosing functions so + * that a nested function definition can access the local (C auto) variables of + * the functions that contain its definition. In fact C provides the first + * pointer (the local variables - the stack frame pointer) and the last (the + * global variables - the BCPL global vector typically implemented as global + * addresses), this code requires one more pointer to make the display - the + * local variables (and function call parameters) of the function that actually + * invokes either the progressive or sequential reader. + * + * Perhaps confusingly this technique is confounded with classes - the + * 'standard_display' defined here is sub-classed as the 'gamma_display' below. + * A gamma_display is a standard_display, taking advantage of the ANSI-C + * requirement that the pointer to the first member of a structure must be the + * same as the pointer to the structure. This allows us to reuse standard_ + * functions in the gamma test code; something that could not be done with + * nested funtions! + */ +typedef struct standard_palette_entry /* pngvalid format palette! */ +{ + png_byte red; + png_byte green; + png_byte blue; + png_byte alpha; +} standard_palette[256]; + +typedef struct standard_display +{ + png_store* ps; /* Test parameters (passed to the function) */ + png_byte colour_type; + png_byte bit_depth; + png_byte red_sBIT; /* Input data sBIT values. */ + png_byte green_sBIT; + png_byte blue_sBIT; + png_byte alpha_sBIT; + int interlace_type; + png_uint_32 id; /* Calculated file ID */ + png_uint_32 w; /* Width of image */ + png_uint_32 h; /* Height of image */ + int npasses; /* Number of interlaced passes */ + png_uint_32 pixel_size; /* Width of one pixel in bits */ + png_uint_32 bit_width; /* Width of output row in bits */ + size_t cbRow; /* Bytes in a row of the output image */ + int do_interlace; /* Do interlacing internally */ + int is_transparent; /* Transparecy information was present. */ + struct + { + png_uint_16 red; + png_uint_16 green; + png_uint_16 blue; + } transparent; /* The transparent color, if set. */ + standard_palette + palette; +} standard_display; + +static void +standard_display_init(standard_display *dp, png_store* ps, png_uint_32 id, + int do_interlace) +{ + dp->ps = ps; + dp->colour_type = COL_FROM_ID(id); + dp->bit_depth = DEPTH_FROM_ID(id); + dp->alpha_sBIT = dp->blue_sBIT = dp->green_sBIT = dp->alpha_sBIT = + dp->bit_depth; + dp->interlace_type = INTERLACE_FROM_ID(id); + dp->id = id; + /* All the rest are filled in after the read_info: */ + dp->w = 0; + dp->h = 0; + dp->npasses = 0; + dp->pixel_size = 0; + dp->bit_width = 0; + dp->cbRow = 0; + dp->do_interlace = do_interlace; + dp->is_transparent = 0; + /* Preset the transparent color to black: */ + memset(&dp->transparent, 0, sizeof dp->transparent); + /* Preset the palette to full intensity/opaque througout: */ + memset(dp->palette, 0xff, sizeof dp->palette); + +} + +/* Call this only if the colour type is 3 - PNG_COLOR_TYPE_PALETTE - otherwise + * it will png_error out. The API returns true if tRNS information was + * present. + */ +static int +standard_palette_init(standard_palette palette, png_structp pp, png_infop pi) +{ + png_colorp pal; + png_bytep trans_alpha; + int num; + + pal = 0; + num = -1; + if (png_get_PLTE(pp, pi, &pal, &num) & PNG_INFO_PLTE) + { + int i; + + for (i=0; i 256) + png_error(pp, "validate: unexpected png_get_tRNS (palette) result"); + + for (i=0; ibit_depth) + png_error(pp, "validate: bit depth changed"); + + if (png_get_color_type(pp, pi) != dp->colour_type) + png_error(pp, "validate: color type changed"); + + if (png_get_filter_type(pp, pi) != PNG_FILTER_TYPE_BASE) + png_error(pp, "validate: filter type changed"); + + if (png_get_interlace_type(pp, pi) != dp->interlace_type) + png_error(pp, "validate: interlacing changed"); + + if (png_get_compression_type(pp, pi) != PNG_COMPRESSION_TYPE_BASE) + png_error(pp, "validate: compression type changed"); + + dp->w = png_get_image_width(pp, pi); + + if (dp->w != standard_width(pp, dp->id)) + png_error(pp, "validate: image width changed"); + + dp->h = png_get_image_height(pp, pi); + + if (dp->h != standard_height(pp, dp->id)) + png_error(pp, "validate: image height changed"); + + /* Record (but don't check at present) the input sBIT according to the colour + * type information. + */ + { + png_color_8p sBIT = 0; + + if (png_get_sBIT(pp, pi, &sBIT) & PNG_INFO_sBIT) + { + int sBIT_invalid = 0; + + if (sBIT == 0) + png_error(pp, "validate: unexpected png_get_sBIT result"); + + if (dp->colour_type & PNG_COLOR_MASK_COLOR) + { + if (sBIT->red == 0 || sBIT->red > dp->bit_depth) + sBIT_invalid = 1; + else + dp->red_sBIT = sBIT->red; + + if (sBIT->green == 0 || sBIT->green > dp->bit_depth) + sBIT_invalid = 1; + else + dp->green_sBIT = sBIT->green; + + if (sBIT->blue == 0 || sBIT->blue > dp->bit_depth) + sBIT_invalid = 1; + else + dp->blue_sBIT = sBIT->blue; + } + + else /* !COLOR */ + { + if (sBIT->gray == 0 || sBIT->gray > dp->bit_depth) + sBIT_invalid = 1; + else + dp->blue_sBIT = dp->green_sBIT = dp->red_sBIT = sBIT->gray; + } + + /* All 8 bits in tRNS for a palette image are significant - see the + * spec. + */ + if (dp->colour_type & PNG_COLOR_MASK_ALPHA) + { + if (sBIT->alpha == 0 || sBIT->alpha > dp->bit_depth) + sBIT_invalid = 1; + else + dp->alpha_sBIT = sBIT->alpha; + } + + if (sBIT_invalid) + png_error(pp, "validate: sBIT value out of range"); + } + } + + /* Important: this is validating the value *before* any transforms have been + * put in place. It doesn't matter for the standard tests, where there are + * no transforms, but it does for other tests where rowbytes may change after + * png_read_update_info. + */ + if (png_get_rowbytes(pp, pi) != standard_rowsize(pp, dp->id)) + png_error(pp, "validate: row size changed"); + + /* The palette is never read for non-palette images, even though it is valid + * - this could be changed. + */ + if (dp->colour_type == 3) /* palette */ + { + int i; + + dp->is_transparent = standard_palette_init(dp->palette, pp, pi); + + /* And validate the result. */ + for (i=0; i<256; ++i) + if (dp->palette[i].red != i || dp->palette[i].green != i || + dp->palette[i].blue != i) + png_error(pp, "validate: color type 3 PLTE chunk changed"); + } + + /* In any case always check for a tranparent color: */ + { + png_color_16p trans_color = 0; + + if (png_get_tRNS(pp, pi, 0, 0, &trans_color) & PNG_INFO_tRNS) + { + if (trans_color == 0) + png_error(pp, "validate: unexpected png_get_tRNS (color) result"); + + switch (dp->colour_type) + { + case 0: + dp->transparent.red = dp->transparent.green = dp->transparent.blue = + trans_color->gray; + dp->is_transparent = 1; + break; + + case 2: + dp->transparent.red = trans_color->red; + dp->transparent.green = trans_color->green; + dp->transparent.blue = trans_color->blue; + dp->is_transparent = 1; + break; + + case 3: + /* Not expected because it should result in the array case + * above. + */ + png_error(pp, "validate: unexpected png_get_tRNS result"); + break; + + default: + png_error(pp, "validate: invalid tRNS chunk with alpha image"); + } + } + } + + /* Read the number of passes - expected to match the value used when + * creating the image (interlaced or not). This has the side effect of + * turning on interlace handling (if do_interlace is not set.) + */ + dp->npasses = npasses_from_interlace_type(pp, dp->interlace_type); + if (!dp->do_interlace && dp->npasses != png_set_interlace_handling(pp)) + png_error(pp, "validate: file changed interlace type"); + + /* Caller calls png_read_update_info or png_start_read_image now, then calls + * part2. + */ +} + +/* This must be called *after* the png_read_update_info call to get the correct + * 'rowbytes' value, otherwise png_get_rowbytes will refer to the untransformed + * image. + */ +static void +standard_info_part2(standard_display *dp, png_structp pp, png_infop pi, + int nImages) +{ + /* Record cbRow now that it can be found. */ + dp->pixel_size = bit_size(pp, png_get_color_type(pp, pi), + png_get_bit_depth(pp, pi)); + dp->bit_width = png_get_image_width(pp, pi) * dp->pixel_size; + dp->cbRow = png_get_rowbytes(pp, pi); + + /* Validate the rowbytes here again. */ + if (dp->cbRow != (dp->bit_width+7)/8) + png_error(pp, "bad png_get_rowbytes calculation"); + + /* Then ensure there is enough space for the output image(s). */ + store_ensure_image(dp->ps, pp, nImages * dp->cbRow * dp->h); +} + +static void +standard_info_imp(standard_display *dp, png_structp pp, png_infop pi, + int nImages) +{ + /* Note that the validation routine has the side effect of turning on + * interlace handling in the subsequent code. + */ + standard_info_part1(dp, pp, pi); + + /* And the info callback has to call this (or png_read_update_info - see + * below in the png_modifier code for that variant. + */ + png_start_read_image(pp); + + /* Validate the height, width and rowbytes plus ensure that sufficient buffer + * exists for decoding the image. + */ + standard_info_part2(dp, pp, pi, nImages); +} + +static void +standard_info(png_structp pp, png_infop pi) +{ + standard_display *dp = png_get_progressive_ptr(pp); + + /* Call with nImages==1 because the progressive reader can only produce one + * image. + */ + standard_info_imp(dp, pp, pi, 1 /*only one image*/); +} + +static void +progressive_row(png_structp pp, png_bytep new_row, png_uint_32 y, int pass) +{ + PNG_CONST standard_display *dp = png_get_progressive_ptr(pp); + + /* When handling interlacing some rows will be absent in each pass, the + * callback still gets called, but with a NULL pointer. This is checked + * in the 'else' clause below. We need our own 'cbRow', but we can't call + * png_get_rowbytes because we got no info structure. + */ + if (new_row != NULL) + { + png_bytep row; + + /* In the case where the reader doesn't do the interlace it gives + * us the y in the sub-image: + */ + if (dp->do_interlace && dp->interlace_type == PNG_INTERLACE_ADAM7) + y = PNG_ROW_FROM_PASS_ROW(y, pass); + + /* Validate this just in case. */ + if (y >= dp->h) + png_error(pp, "invalid y to progressive row callback"); + + row = dp->ps->image + y * dp->cbRow; + + /* Combine the new row into the old: */ + if (dp->do_interlace) + { + if (dp->interlace_type == PNG_INTERLACE_ADAM7) + deinterlace_row(row, new_row, dp->pixel_size, dp->w, pass); + else + memcpy(row, new_row, dp->cbRow); + } + else + png_progressive_combine_row(pp, row, new_row); + } else if (dp->interlace_type == PNG_INTERLACE_ADAM7 && + PNG_ROW_IN_INTERLACE_PASS(y, pass) && + PNG_PASS_COLS(dp->w, pass) > 0) + png_error(pp, "missing row in progressive de-interlacing"); +} + +static void +sequential_row(standard_display *dp, png_structp pp, png_infop pi, + PNG_CONST png_bytep pImage, PNG_CONST png_bytep pDisplay) +{ + PNG_CONST int npasses = dp->npasses; + PNG_CONST int do_interlace = dp->do_interlace && + dp->interlace_type == PNG_INTERLACE_ADAM7; + PNG_CONST png_uint_32 height = standard_height(pp, dp->id); + PNG_CONST png_uint_32 width = standard_width(pp, dp->id); + PNG_CONST size_t cbRow = dp->cbRow; + int pass; + + for (pass=0; pass 0 && PNG_ROW_IN_INTERLACE_PASS(y, pass)) + { + /* Read the row into a pair of temporary buffers, then do the + * merge here into the output rows. + */ + png_byte row[STANDARD_ROWMAX], display[STANDARD_ROWMAX]; + + /* The following aids (to some extent) error detection - we can + * see where png_read_row wrote. Use opposite values in row and + * display to make this easier. + */ + memset(row, 0xff, sizeof row); + memset(display, 0, sizeof display); + + png_read_row(pp, row, display); + + if (pRow1 != NULL) + deinterlace_row(pRow1, row, dp->pixel_size, dp->w, pass); + + if (pRow2 != NULL) + deinterlace_row(pRow2, display, dp->pixel_size, dp->w, pass); + } + } + else + png_read_row(pp, pRow1, pRow2); + + if (pRow1 != NULL) + pRow1 += cbRow; + + if (pRow2 != NULL) + pRow2 += cbRow; + } + } + + /* And finish the read operation (only really necessary if the caller wants + * to find additional data in png_info from chunks after the last IDAT.) + */ + png_read_end(pp, pi); +} + +static void +standard_row_validate(standard_display *dp, png_structp pp, png_const_bytep row, + png_const_bytep display, png_uint_32 y) +{ + png_byte std[STANDARD_ROWMAX]; + + memset(std, 0xff, sizeof std); + standard_row(pp, std, dp->id, y); + + /* At the end both the 'row' and 'display' arrays should end up identical. + * In earlier passes 'row' will be partially filled in, with only the pixels + * that have been read so far, but 'display' will have those pixels + * replicated to fill the unread pixels while reading an interlaced image. + * The side effect inside the libpng sequential reader is that the 'row' + * array retains the correct values for unwritten pixels within the row + * bytes, while the 'display' array gets bits off the end of the image (in + * the last byte) trashed. Unfortunately in the progressive reader the + * row bytes are always trashed, so we always do a pixel_cmp here even though + * a memcmp of all cbRow bytes will succeed for the sequential reader. + */ + if (row != NULL && pixel_cmp(std, row, dp->bit_width) != 0) + { + char msg[64]; + sprintf(msg, "PNG image row %d changed", y); + png_error(pp, msg); + } + + /* In this case use pixel_cmp because we need to compare a partial + * byte at the end of the row if the row is not an exact multiple + * of 8 bits wide. + */ + if (display != NULL && pixel_cmp(std, display, dp->bit_width) != 0) + { + char msg[64]; + sprintf(msg, "display row %d changed", y); + png_error(pp, msg); + } +} + +static void +standard_image_validate(standard_display *dp, png_structp pp, + png_const_bytep pImage, png_const_bytep pDisplay) +{ + png_uint_32 y; + + for (y=0; yh; ++y) + { + standard_row_validate(dp, pp, pImage, pDisplay, y); + + if (pImage != NULL) + pImage += dp->cbRow; + + if (pDisplay != NULL) + pDisplay += dp->cbRow; + } + + /* This avoids false positives if the validation code is never called! */ + dp->ps->validated = 1; +} + +static void +standard_end(png_structp pp, png_infop pi) +{ + standard_display *dp = png_get_progressive_ptr(pp); + + UNUSED(pi) + + /* Validate the image - progressive reading only produces one variant for + * interlaced images. + */ + standard_image_validate(dp, pp, dp->ps->image, NULL); +} + +/* A single test run checking the standard image to ensure it is not damaged. */ +static void +standard_test(png_store* PNG_CONST psIn, png_uint_32 PNG_CONST id, + int do_interlace) +{ + standard_display d; + context(psIn, fault); + + /* Set up the display (stack frame) variables from the arguments to the + * function and initialize the locals that are filled in later. + */ + standard_display_init(&d, psIn, id, do_interlace); + + /* Everything is protected by a Try/Catch. The functions called also + * typically have local Try/Catch blocks. + */ + Try + { + png_structp pp; + png_infop pi; + + /* Get a png_struct for reading the image. This will throw an error if it + * fails, so we don't need to check the result. + */ + pp = set_store_for_read(d.ps, &pi, d.id, + d.do_interlace ? (d.ps->progressive ? + "pngvalid progressive deinterlacer" : + "pngvalid sequential deinterlacer") : (d.ps->progressive ? + "progressive reader" : "sequential reader")); + + /* Introduce the correct read function. */ + if (d.ps->progressive) + { + png_set_progressive_read_fn(pp, &d, standard_info, progressive_row, + standard_end); + + /* Now feed data into the reader until we reach the end: */ + store_progressive_read(d.ps, pp, pi); + } + else + { + /* Note that this takes the store, not the display. */ + png_set_read_fn(pp, d.ps, store_read); + + /* Check the header values: */ + png_read_info(pp, pi); + + /* The code tests both versions of the images that the sequential + * reader can produce. + */ + standard_info_imp(&d, pp, pi, 2 /*images*/); + + /* Need the total bytes in the image below; we can't get to this point + * unless the PNG file values have been checked against the expected + * values. + */ + { + PNG_CONST png_bytep pImage = d.ps->image; + PNG_CONST png_bytep pDisplay = pImage + d.cbRow * d.h; + + sequential_row(&d, pp, pi, pImage, pDisplay); + + /* After the last pass loop over the rows again to check that the + * image is correct. + */ + standard_image_validate(&d, pp, pImage, pDisplay); + } + } + + /* Check for validation. */ + if (!d.ps->validated) + png_error(pp, "image read failed silently"); + + /* Successful completion. */ + } + + Catch(fault) + d.ps = fault; /* make sure this hasn't been clobbered. */ + + /* In either case clean up the store. */ + store_read_reset(d.ps); +} + +static int +test_standard(png_modifier* PNG_CONST pm, png_byte PNG_CONST colour_type, + int bdlo, int PNG_CONST bdhi) +{ + for (; bdlo <= bdhi; ++bdlo) + { + int interlace_type; + + for (interlace_type = PNG_INTERLACE_NONE; + interlace_type < PNG_INTERLACE_LAST; ++interlace_type) + { + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), + interlace_type, 0, 0, 0), 0/*do_interlace*/); + + if (fail(pm)) + return 0; + } + } + + return 1; /* keep going */ +} + +static void +perform_standard_test(png_modifier *pm) +{ + /* Test each colour type over the valid range of bit depths (expressed as + * log2(bit_depth) in turn, stop as soon as any error is detected. + */ + if (!test_standard(pm, 0, 0, READ_BDHI)) + return; + + if (!test_standard(pm, 2, 3, READ_BDHI)) + return; + + if (!test_standard(pm, 3, 0, 3)) + return; + + if (!test_standard(pm, 4, 3, READ_BDHI)) + return; + + if (!test_standard(pm, 6, 3, READ_BDHI)) + return; +} + + +/********************************** SIZE TESTS ********************************/ +static int +test_size(png_modifier* PNG_CONST pm, png_byte PNG_CONST colour_type, + int bdlo, int PNG_CONST bdhi) +{ + /* Run the tests on each combination. + * + * NOTE: on my 32 bit x86 each of the following blocks takes + * a total of 3.5 seconds if done across every combo of bit depth + * width and height. This is a waste of time in practice, hence the + * hinc and winc stuff: + */ + static PNG_CONST png_byte hinc[] = {1, 3, 11, 1, 5}; + static PNG_CONST png_byte winc[] = {1, 9, 5, 7, 1}; + for (; bdlo <= bdhi; ++bdlo) + { + png_uint_32 h, w; + + for (h=1; h<=16; h+=hinc[bdlo]) for (w=1; w<=16; w+=winc[bdlo]) + { + /* First test all the 'size' images against the sequential + * reader using libpng to deinterlace (where required.) This + * validates the write side of libpng. There are four possibilities + * to validate. + */ + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), + PNG_INTERLACE_NONE, w, h, 0), 0/*do_interlace*/); + + if (fail(pm)) + return 0; + + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), + PNG_INTERLACE_NONE, w, h, 1), 0/*do_interlace*/); + + if (fail(pm)) + return 0; + + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), + PNG_INTERLACE_ADAM7, w, h, 0), 0/*do_interlace*/); + + if (fail(pm)) + return 0; + + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), + PNG_INTERLACE_ADAM7, w, h, 1), 0/*do_interlace*/); + + if (fail(pm)) + return 0; + + /* Now validate the interlaced read side - do_interlace true, + * in the progressive case this does actually make a difference + * to the code used in the non-interlaced case too. + */ + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), + PNG_INTERLACE_NONE, w, h, 0), 1/*do_interlace*/); + + if (fail(pm)) + return 0; + + standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), + PNG_INTERLACE_ADAM7, w, h, 0), 1/*do_interlace*/); + + if (fail(pm)) + return 0; + } + } + + return 1; /* keep going */ +} + +static void +perform_size_test(png_modifier *pm) +{ + /* Test each colour type over the valid range of bit depths (expressed as + * log2(bit_depth) in turn, stop as soon as any error is detected. + */ + if (!test_size(pm, 0, 0, READ_BDHI)) + return; + + if (!test_size(pm, 2, 3, READ_BDHI)) + return; + + /* For the moment don't do the palette test - it's a waste of time when + * compared to the greyscale test. + */ +#if 0 + if (!test_size(pm, 3, 0, 3)) + return; +#endif + + if (!test_size(pm, 4, 3, READ_BDHI)) + return; + + if (!test_size(pm, 6, 3, READ_BDHI)) + return; +} + + +/******************************* TRANSFORM TESTS ******************************/ +/* A set of tests to validate libpng image transforms. The possibilities here + * are legion because the transforms can be combined in a combinatorial + * fashion. To deal with this some measure of restraint is required, otherwise + * the tests would take forever. + */ +typedef struct image_pixel +{ + /* A local (pngvalid) representation of a PNG pixel, in all its + * various forms. + */ + unsigned int red, green, blue, alpha; /* For non-palette images. */ + unsigned int palette_index; /* For a palette image. */ + png_byte colour_type; /* As in the spec. */ + png_byte bit_depth; /* Defines bit size in row */ + png_byte sample_depth; /* Scale of samples */ + int have_tRNS; /* tRNS chunk may need processing */ + + /* For checking the code calculates double precision floating point values + * along with an error value, accumulated from the transforms. Because an + * sBIT setting allows larger error bounds (indeed, by the spec, apparently + * up to just less than +/-1 in the scaled value) the *lowest* sBIT for each + * channel is stored. This sBIT value is folded in to the stored error value + * at the end of the application of the transforms to the pixel. + */ + double redf, greenf, bluef, alphaf; + double rede, greene, bluee, alphae; + png_byte red_sBIT, green_sBIT, blue_sBIT, alpha_sBIT; +} image_pixel; + +/* Shared utility function, see below. */ +static void +image_pixel_setf(image_pixel *this, unsigned int max) +{ + this->redf = this->red / (double)max; + this->greenf = this->green / (double)max; + this->bluef = this->blue / (double)max; + this->alphaf = this->alpha / (double)max; + + if (this->red < max) + this->rede = this->redf * DBL_EPSILON; + else + this->rede = 0; + if (this->green < max) + this->greene = this->greenf * DBL_EPSILON; + else + this->greene = 0; + if (this->blue < max) + this->bluee = this->bluef * DBL_EPSILON; + else + this->bluee = 0; + if (this->alpha < max) + this->alphae = this->alphaf * DBL_EPSILON; + else + this->alphae = 0; +} + +/* Initialize the structure for the next pixel - call this before doing any + * transforms and call it for each pixel since all the fields may need to be + * reset. + */ +static void +image_pixel_init(image_pixel *this, png_const_bytep row, png_byte colour_type, + png_byte bit_depth, png_uint_32 x, standard_palette palette) +{ + PNG_CONST png_byte sample_depth = (png_byte)(colour_type == + PNG_COLOR_TYPE_PALETTE ? 8 : bit_depth); + PNG_CONST unsigned int max = (1U<palette_index = this->red = this->green = this->blue = + sample(row, colour_type, bit_depth, x, 0); + this->alpha = max; + this->red_sBIT = this->green_sBIT = this->blue_sBIT = this->alpha_sBIT = + sample_depth; + + /* Then override as appropriate: */ + if (colour_type == 3) /* palette */ + { + /* This permits the caller to default to the sample value. */ + if (palette != 0) + { + PNG_CONST unsigned int i = this->palette_index; + + this->red = palette[i].red; + this->green = palette[i].green; + this->blue = palette[i].blue; + this->alpha = palette[i].alpha; + } + } + + else /* not palette */ + { + unsigned int i = 0; + + if (colour_type & 2) + { + this->green = sample(row, colour_type, bit_depth, x, 1); + this->blue = sample(row, colour_type, bit_depth, x, 2); + i = 2; + } + if (colour_type & 4) + this->alpha = sample(row, colour_type, bit_depth, x, ++i); + } + + /* Calculate the scaled values, these are simply the values divided by + * 'max' and the error is initialized to the double precision epsilon value + * from the header file. + */ + image_pixel_setf(this, max); + + /* Store the input information for use in the transforms - these will + * modify the information. + */ + this->colour_type = colour_type; + this->bit_depth = bit_depth; + this->sample_depth = sample_depth; + this->have_tRNS = 0; +} + +/* Convert a palette image to an rgb image. This necessarily converts the tRNS + * chunk at the same time, because the tRNS will be in palette form. + */ +static void +image_pixel_convert_PLTE(image_pixel *this, const standard_display *display) +{ + if (this->colour_type == PNG_COLOR_TYPE_PALETTE) + { + PNG_CONST unsigned int i = this->palette_index; + + this->bit_depth = this->sample_depth; + this->red = display->palette[i].red; + this->green = display->palette[i].green; + this->blue = display->palette[i].blue; + this->red_sBIT = display->red_sBIT; + this->green_sBIT = display->green_sBIT; + this->blue_sBIT = display->blue_sBIT; + + if (this->have_tRNS) + { + this->alpha = display->palette[i].alpha; + this->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; + this->have_tRNS = 0; + } + else + { + this->alpha = 255; + this->colour_type = PNG_COLOR_TYPE_RGB; + } + this->alpha_sBIT = 8; + + /* And regenerate the scaled values and all the errors, which are now set + * back to the initial values. + */ + image_pixel_setf(this, 255); + } +} + +/* Add an alpha channel, this will glom in the tRNS information because tRNS is + * not valid in an alpha image. The bit depth will invariably be set to at + * least 8. Palette images will be converted to alpha (using the above API). + */ +static void +image_pixel_add_alpha(image_pixel *this, const standard_display *display) +{ + if (this->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(this, display); + + if ((this->colour_type & PNG_COLOR_MASK_ALPHA) == 0) + { + if (this->colour_type == PNG_COLOR_TYPE_GRAY) + { + if (this->bit_depth < 8) + this->bit_depth = 8; + + if (this->have_tRNS) + { + this->have_tRNS = 0; + + /* Check the input, original, channel value here against the + * original tRNS gray chunk valie. + */ + if (this->red == display->transparent.red) + this->alphaf = 0; + else + this->alphaf = 1; + } + else + this->alphaf = 1; + + this->colour_type = PNG_COLOR_TYPE_GRAY_ALPHA; + } + + else if (this->colour_type == PNG_COLOR_TYPE_RGB) + { + if (this->have_tRNS) + { + this->have_tRNS = 0; + + /* Again, check the exact input values, not the current transformed + * value! + */ + if (this->red == display->transparent.red && + this->green == display->transparent.green && + this->blue == display->transparent.blue) + this->alphaf = 0; + else + this->alphaf = 1; + + this->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; + } + } + + /* The error in the alpha is zero and the sBIT value comes from the + * original sBIT data (actually it will always be the original bit depth). + */ + this->alphae = 0; + this->alpha_sBIT = display->alpha_sBIT; + } +} + +struct transform_display; +typedef struct image_transform +{ + /* The name of this transform: a string. */ + PNG_CONST char *name; + + /* Each transform can be disabled from the command line: */ + int enable; + + /* The global list of transforms; read only. */ + struct image_transform *PNG_CONST list; + + /* The global count of the number of times this transform has been set on an + * image. + */ + unsigned int global_use; + + /* The local count of the number of times this transform has been set. */ + unsigned int local_use; + + /* The next transform in the list, each transform must call its own next + * transform after it has processed the pixel successfully. + */ + PNG_CONST struct image_transform *next; + + /* A single transform for the image, expressed as a series of function + * callbacks and some space for values. + * + * First a callback to set the transform on the current png_read_struct: + */ + void (*set)(PNG_CONST struct image_transform *this, + struct transform_display *that, png_structp pp, png_infop pi); + + /* Then a transform that takes an input pixel in one PNG format or another + * and modifies it by a pngvalid implementation of the transform (thus + * duplicating the libpng intent without, we hope, duplicating the bugs + * in the libpng implementation!) The png_structp is solely to allow error + * reporting via png_error and png_warning. + */ + void (*mod)(PNG_CONST struct image_transform *this, image_pixel *that, + png_structp pp, PNG_CONST struct transform_display *display); + + /* Add this transform to the list and return true if the transform is + * meaningful for this colour type and bit depth - if false then the + * transform should have no effect on the image so there's not a lot of + * point running it. + */ + int (*add)(struct image_transform *this, + PNG_CONST struct image_transform **that, png_byte colour_type, + png_byte bit_depth); +} image_transform; + +typedef struct transform_display +{ + standard_display this; + + /* Parameters */ + png_modifier* pm; + PNG_CONST image_transform* transform_list; + + /* Local variables */ + png_byte output_colour_type; + png_byte output_bit_depth; +} transform_display; + +/* Two functions to end the list: */ +static void +image_transform_set_end(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + UNUSED(this) + UNUSED(that) + UNUSED(pp) + UNUSED(pi) +} + +/* At the end of the list recalculate the output image pixel value from the + * double precision values set up by the preceding 'mod' calls: + */ +static unsigned int +sample_scale(double sample_value, unsigned int scale) +{ + sample_value = floor(sample_value * scale + .5); + + /* Return NaN as 0: */ + if (!(sample_value > 0)) + sample_value = 0; + else if (sample_value > scale) + sample_value = scale; + + return (unsigned int)sample_value; +} + +static void +image_transform_mod_end(PNG_CONST image_transform *this, image_pixel *that, + png_structp pp, PNG_CONST transform_display *display) +{ + PNG_CONST unsigned int scale = (1U<sample_depth)-1; + + UNUSED(this) + UNUSED(pp) + UNUSED(display) + + /* At the end recalculate the digitized red green and blue values according + * to the current sample_depth of the pixel. + * + * The sample value is simply scaled to the maximum, checking for over + * and underflow (which can both happen for some image transforms, + * including simple size scaling, though libpng doesn't do that at present. + */ + that->red = sample_scale(that->redf, scale); + + /* The error value is increased, at the end, according to the lowest sBIT + * value seen. Common sense tells us that the intermediate integer + * representations are no more accurate than +/- 0.5 in the integral values, + * the sBIT allows the implementation to be worse than this. In addition the + * PNG specification actually permits any error within the range (-1..+1), + * but that is ignored here. Instead the final digitized value is compared, + * below to the digitized value of the error limits - this has the net effect + * of allowing (almost) +/-1 in the output value. It's difficult to see how + * any algorithm that digitizes intermediate results can be more accurate. + */ + that->rede += 1./(2*((1U<red_sBIT)-1)); + + if (that->colour_type & PNG_COLOR_MASK_COLOR) + { + that->green = sample_scale(that->greenf, scale); + that->blue = sample_scale(that->bluef, scale); + that->greene += 1./(2*((1U<green_sBIT)-1)); + that->bluee += 1./(2*((1U<blue_sBIT)-1)); + } + else + { + that->blue = that->green = that->red; + that->bluef = that->greenf = that->redf; + that->bluee = that->greene = that->rede; + } + + if ((that->colour_type & PNG_COLOR_MASK_ALPHA) || + that->colour_type == PNG_COLOR_TYPE_PALETTE) + { + that->alpha = sample_scale(that->alphaf, scale); + that->alphae += 1./(2*((1U<alpha_sBIT)-1)); + } + else + { + that->alpha = scale; /* opaque */ + that->alpha = 1; /* Override this. */ + that->alphae = 0; /* It's exact ;-) */ + } +} + +/* Static 'end' structure: */ +static image_transform image_transform_end = +{ + "(end)", /* name */ + 1, /* enable */ + 0, /* list */ + 0, /* global_use */ + 0, /* local_use */ + 0, /* next */ + image_transform_set_end, + image_transform_mod_end, + 0 /* never called, I want it to crash if it is! */ +}; + +/* Reader callbacks and implementations, where they differ from the standard + * ones. + */ +static void +transform_display_init(transform_display *dp, png_modifier *pm, png_uint_32 id, + PNG_CONST image_transform *transform_list) +{ + /* Standard fields */ + standard_display_init(&dp->this, &pm->this, id, 0/*do_interlace*/); + + /* Parameter fields */ + dp->pm = pm; + dp->transform_list = transform_list; + + /* Local variable fields */ + dp->output_colour_type = 255; /* invalid */ + dp->output_bit_depth = 255; /* invalid */ +} + +static void +transform_info_imp(transform_display *dp, png_structp pp, png_infop pi) +{ + /* Reuse the standard stuff as appropriate. */ + standard_info_part1(&dp->this, pp, pi); + + /* Now set the list of transforms. */ + dp->transform_list->set(dp->transform_list, dp, pp, pi); + + /* Update the info structure for these transforms: */ + png_read_update_info(pp, pi); + + /* And get the output information into the standard_display */ + standard_info_part2(&dp->this, pp, pi, 1/*images*/); + + /* Plus the extra stuff we need for the transform tests: */ + dp->output_colour_type = png_get_color_type(pp, pi); + dp->output_bit_depth = png_get_bit_depth(pp, pi); + + /* Validate the combination of colour type and bit depth that we are getting + * out of libpng; the semantics of something not in the PNG spec are, at + * best, unclear. + */ + switch (dp->output_colour_type) + { + case PNG_COLOR_TYPE_PALETTE: + if (dp->output_bit_depth > 8) goto error; + /*FALL THROUGH*/ + case PNG_COLOR_TYPE_GRAY: + if (dp->output_bit_depth == 1 || dp->output_bit_depth == 2 || + dp->output_bit_depth == 4) + break; + /*FALL THROUGH*/ + default: + if (dp->output_bit_depth == 8 || dp->output_bit_depth == 16) + break; + /*FALL THROUGH*/ + error: + { + char message[128]; + size_t pos; + + pos = safecat(message, sizeof message, 0, + "invalid final bit depth: colour type("); + pos = safecatn(message, sizeof message, pos, dp->output_colour_type); + pos = safecat(message, sizeof message, pos, ") with bit depth: "); + pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); + + png_error(pp, message); + } + } + + /* Use a test pixel to check that the output agrees with what we expect - + * this avoids running the whole test if the output is unexpected. + */ + { + image_pixel test_pixel; + + memset(&test_pixel, 0, sizeof test_pixel); + test_pixel.colour_type = dp->this.colour_type; /* input */ + test_pixel.bit_depth = dp->this.bit_depth; + if (test_pixel.colour_type == PNG_COLOR_TYPE_PALETTE) + test_pixel.sample_depth = 8; + else + test_pixel.sample_depth = test_pixel.bit_depth; + /* Don't need sBIT here */ + test_pixel.have_tRNS = dp->this.is_transparent; + + dp->transform_list->mod(dp->transform_list, &test_pixel, pp, dp); + + if (test_pixel.colour_type != dp->output_colour_type) + { + char message[128]; + size_t pos = safecat(message, sizeof message, 0, "colour type "); + + pos = safecatn(message, sizeof message, pos, dp->output_colour_type); + pos = safecat(message, sizeof message, pos, " expected "); + pos = safecatn(message, sizeof message, pos, test_pixel.colour_type); + + png_error(pp, message); + } + + if (test_pixel.bit_depth != dp->output_bit_depth) + { + char message[128]; + size_t pos = safecat(message, sizeof message, 0, "bit depth "); + + pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); + pos = safecat(message, sizeof message, pos, " expected "); + pos = safecatn(message, sizeof message, pos, test_pixel.bit_depth); + + png_error(pp, message); + } + + /* If both bit depth and colour type are correct check the sample depth. + * I believe these are both internal errors. + */ + if (test_pixel.colour_type == PNG_COLOR_TYPE_PALETTE) + { + if (test_pixel.sample_depth != 8) /* oops - internal error! */ + png_error(pp, "pngvalid: internal: palette sample depth not 8"); + } + else if (test_pixel.sample_depth != dp->output_bit_depth) + { + char message[128]; + size_t pos = safecat(message, sizeof message, 0, + "internal: sample depth "); + + pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); + pos = safecat(message, sizeof message, pos, " expected "); + pos = safecatn(message, sizeof message, pos, test_pixel.sample_depth); + + png_error(pp, message); + } + } +} + +static void +transform_info(png_structp pp, png_infop pi) +{ + transform_info_imp(png_get_progressive_ptr(pp), pp, pi); +} + +static void +transform_range_check(png_structp pp, unsigned int r, unsigned int g, + unsigned int b, unsigned int a, unsigned int in_digitized, double in, + unsigned int out, png_byte sample_depth, double err, PNG_CONST char *name) +{ + /* Compare the scaled, digitzed, values of our local calculation (in+-err) + * with the digitized values libpng produced; 'sample_depth' is the actual + * digitization depth of the libpng output colors (the bit depth except for + * palette images where it is always 8.) + */ + unsigned int max = (1U<= in_min && out <= in_max)) + { + char message[256]; + size_t pos; + + pos = safecat(message, sizeof message, 0, name); + pos = safecat(message, sizeof message, pos, " output value error: rgba("); + pos = safecatn(message, sizeof message, pos, r); + pos = safecat(message, sizeof message, pos, ","); + pos = safecatn(message, sizeof message, pos, g); + pos = safecat(message, sizeof message, pos, ","); + pos = safecatn(message, sizeof message, pos, b); + pos = safecat(message, sizeof message, pos, ","); + pos = safecatn(message, sizeof message, pos, a); + pos = safecat(message, sizeof message, pos, "): "); + pos = safecatn(message, sizeof message, pos, out); + pos = safecat(message, sizeof message, pos, " expected: "); + pos = safecatn(message, sizeof message, pos, in_digitized); + pos = safecat(message, sizeof message, pos, " ("); + pos = safecatd(message, sizeof message, pos, (in-err)*max, 3); + pos = safecat(message, sizeof message, pos, ".."); + pos = safecatd(message, sizeof message, pos, (in+err)*max, 3); + pos = safecat(message, sizeof message, pos, ")"); + + png_error(pp, message); + } +} + +static void +transform_image_validate(transform_display *dp, png_structp pp, png_infop pi, + png_const_bytep pRow) +{ + /* Constants for the loop below: */ + PNG_CONST png_byte in_ct = dp->this.colour_type; + PNG_CONST png_byte in_bd = dp->this.bit_depth; + PNG_CONST png_uint_32 w = dp->this.w; + PNG_CONST png_uint_32 h = dp->this.h; + PNG_CONST size_t cbRow = dp->this.cbRow; + PNG_CONST png_byte out_ct = dp->output_colour_type; + PNG_CONST png_byte out_bd = dp->output_bit_depth; + PNG_CONST png_byte sample_depth = (png_byte)(out_ct == + PNG_COLOR_TYPE_PALETTE ? 8 : out_bd); + PNG_CONST png_byte red_sBIT = dp->this.red_sBIT; + PNG_CONST png_byte green_sBIT = dp->this.green_sBIT; + PNG_CONST png_byte blue_sBIT = dp->this.blue_sBIT; + PNG_CONST png_byte alpha_sBIT = dp->this.alpha_sBIT; + PNG_CONST int have_tRNS = dp->this.is_transparent; + + standard_palette out_palette; + png_uint_32 y; + + UNUSED(pi) + + /* Read the palette corresponding to the output if the output colour type + * indicates a palette, othewise set out_palette to garbage. + */ + if (out_ct == PNG_COLOR_TYPE_PALETTE) + (void)standard_palette_init(out_palette, pp, pi); + else + memset(out_palette, 0x5e, sizeof out_palette); + + for (y=0; ythis.palette); + + in_pixel.red_sBIT = red_sBIT; + in_pixel.green_sBIT = green_sBIT; + in_pixel.blue_sBIT = blue_sBIT; + in_pixel.alpha_sBIT = alpha_sBIT; + in_pixel.have_tRNS = have_tRNS; + + /* For error detection, below. */ + r = in_pixel.red; + g = in_pixel.green; + b = in_pixel.blue; + a = in_pixel.alpha; + + dp->transform_list->mod(dp->transform_list, &in_pixel, pp, dp); + + /* Read the output pixel and compare it to what we got, we don't + * use the error field here, so no need to update sBIT. + */ + image_pixel_init(&out_pixel, pRow, out_ct, out_bd, x, out_palette); + + /* We don't expect changes to the index here even if the bit depth is + * changed. + */ + if (in_ct == PNG_COLOR_TYPE_PALETTE && + out_ct == PNG_COLOR_TYPE_PALETTE) + { + if (in_pixel.palette_index != out_pixel.palette_index) + png_error(pp, "unexpected transformed palette index"); + } + + /* Check the colours for palette images too - in fact the palette could + * be separately verified itself in most cases. + */ + if (in_pixel.red != out_pixel.red) + transform_range_check(pp, r, g, b, a, in_pixel.red, in_pixel.redf, + out_pixel.red, sample_depth, in_pixel.rede, "red/gray"); + + if ((out_ct & PNG_COLOR_MASK_COLOR) != 0 && + in_pixel.green != out_pixel.green) + transform_range_check(pp, r, g, b, a, in_pixel.green, + in_pixel.greenf, out_pixel.green, sample_depth, in_pixel.greene, + "green"); + + if ((out_ct & PNG_COLOR_MASK_COLOR) != 0 && + in_pixel.blue != out_pixel.blue) + transform_range_check(pp, r, g, b, a, in_pixel.blue, in_pixel.bluef, + out_pixel.blue, sample_depth, in_pixel.bluee, "blue"); + + if ((out_ct & PNG_COLOR_MASK_ALPHA) != 0 && + in_pixel.alpha != out_pixel.alpha) + transform_range_check(pp, r, g, b, a, in_pixel.alpha, + in_pixel.alphaf, out_pixel.alpha, sample_depth, in_pixel.alphae, + "alpha"); + } /* pixel (x) loop */ + } /* row (y) loop */ + + /* Record that something was actually checked to avoid a false positive. */ + dp->this.ps->validated = 1; +} + +static void +transform_end(png_structp pp, png_infop pi) +{ + transform_display *dp = png_get_progressive_ptr(pp); + + transform_image_validate(dp, pp, pi, dp->this.ps->image); +} + +/* A single test run. */ +static void +transform_test(png_modifier *pmIn, PNG_CONST png_uint_32 idIn, + PNG_CONST image_transform* transform_listIn, PNG_CONST char *name) +{ + transform_display d; + context(&pmIn->this, fault); + + transform_display_init(&d, pmIn, idIn, transform_listIn); + + Try + { + png_structp pp; + png_infop pi; + + /* Get a png_struct for writing the image. */ + pp = set_modifier_for_read(d.pm, &pi, d.this.id, name); + +# if 0 + /* Logging (debugging only) */ + { + char buffer[256]; + + (void)store_message(&d.pm->this, pp, buffer, sizeof buffer, 0, + "running test"); + + fprintf(stderr, "%s\n", buffer); + } +# endif + + /* Introduce the correct read function. */ + if (d.pm->this.progressive) + { + /* Share the row function with the standard implementation. */ + png_set_progressive_read_fn(pp, &d, transform_info, progressive_row, + transform_end); + + /* Now feed data into the reader until we reach the end: */ + modifier_progressive_read(d.pm, pp, pi); + } + else + { + /* modifier_read expects a png_modifier* */ + png_set_read_fn(pp, d.pm, modifier_read); + + /* Check the header values: */ + png_read_info(pp, pi); + + /* Process the 'info' requirements. Only one image is generated */ + transform_info_imp(&d, pp, pi); + + sequential_row(&d.this, pp, pi, NULL, d.this.ps->image); + + transform_image_validate(&d, pp, pi, d.this.ps->image); + } + + modifier_reset(d.pm); + } + + Catch(fault) + modifier_reset((png_modifier*)fault); +} + +/* The transforms: */ +#define ITSTRUCT(name) image_transform_##name +#define IT(name,prev)\ +static image_transform ITSTRUCT(name) =\ +{\ + #name,\ + 1, /*enable*/\ + &ITSTRUCT(prev), /*list*/\ + 0, /*global_use*/\ + 0, /*local_use*/\ + 0, /*next*/\ + image_transform_png_set_##name##_set,\ + image_transform_png_set_##name##_mod,\ + image_transform_png_set_##name##_add\ +} + +/* To save code: */ +static int +image_transform_default_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(colour_type) + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return 1; +} + +/* png_set_palette_to_rgb */ +static void +image_transform_png_set_palette_to_rgb_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_palette_to_rgb(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_palette_to_rgb_mod(PNG_CONST image_transform *this, + image_pixel *that, png_structp pp, PNG_CONST transform_display *display) +{ + if (that->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(that, &display->this); + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_palette_to_rgb_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return colour_type == PNG_COLOR_TYPE_PALETTE; +} + +IT(palette_to_rgb, end); + + +/* png_set_tRNS_to_alpha */ +static void +image_transform_png_set_tRNS_to_alpha_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_tRNS_to_alpha(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_tRNS_to_alpha_mod(PNG_CONST image_transform *this, + image_pixel *that, png_structp pp, PNG_CONST transform_display *display) +{ + /* LIBPNG BUG: this always forces palette images to RGB. */ + if (that->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(that, &display->this); + + /* This effectively does an 'expand' only if there is some transparency to + * covert to an alpha channel. + */ + if (that->have_tRNS) + image_pixel_add_alpha(that, &display->this); + + /* LIBPNG BUG: otherwise libpng still expands to 8 bits! */ + else + { + if (that->bit_depth < 8) + that->bit_depth =8; + if (that->sample_depth < 8) + that->sample_depth = 8; + } + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_tRNS_to_alpha_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + /* We don't know yet whether there will be a tRNS chunk, but we know that + * this transformation should do nothing if there already is an alpha + * channel. + */ + return (colour_type & PNG_COLOR_MASK_ALPHA) == 0; +} + +IT(tRNS_to_alpha,palette_to_rgb); + +/* png_set_gray_to_rgb */ +static void +image_transform_png_set_gray_to_rgb_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_gray_to_rgb(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_gray_to_rgb_mod(PNG_CONST image_transform *this, + image_pixel *that, png_structp pp, PNG_CONST transform_display *display) +{ + /* NOTE: we can actually pend the tRNS processing at this point because we + * can correctly recognize the original pixel value even though we have + * mapped the one gray channel to the three RGB ones, but in fact libpng + * doesn't do this, so we don't either. + */ + if ((that->colour_type & PNG_COLOR_MASK_COLOR) == 0 && that->have_tRNS) + image_pixel_add_alpha(that, &display->this); + + /* Simply expand the bit depth and alter the colour type as required. */ + if (that->colour_type == PNG_COLOR_TYPE_GRAY) + { + /* RGB images have a bit depth at least equal to '8' */ + if (that->bit_depth < 8) + that->sample_depth = that->bit_depth = 8; + + /* And just changing the colour type works here because the green and blue + * channels are being maintained in lock-step with the red/gray: + */ + that->colour_type = PNG_COLOR_TYPE_RGB; + } + + else if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) + that->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_gray_to_rgb_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return (colour_type & PNG_COLOR_MASK_COLOR) == 0; +} + +IT(gray_to_rgb,tRNS_to_alpha); + +/* png_set_expand */ +static void +image_transform_png_set_expand_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_expand(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_expand_mod(PNG_CONST image_transform *this, + image_pixel *that, png_structp pp, PNG_CONST transform_display *display) +{ + /* The general expand case depends on what the colour type is: */ + if (that->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(that, &display->this); + else if (that->bit_depth < 8) /* grayscale */ + that->sample_depth = that->bit_depth = 8; + + if (that->have_tRNS) + image_pixel_add_alpha(that, &display->this); + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_expand_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + /* 'expand' should do nothing for RGBA or GA input - no tRNS and the bit + * depth is at least 8 already. + */ + return (colour_type & PNG_COLOR_MASK_ALPHA) == 0; +} + +IT(expand,gray_to_rgb); + +/* png_set_expand_gray_1_2_4_to_8 + * LIBPNG BUG: this just does an 'expand' + */ +static void +image_transform_png_set_expand_gray_1_2_4_to_8_set( + PNG_CONST image_transform *this, transform_display *that, png_structp pp, + png_infop pi) +{ + png_set_expand_gray_1_2_4_to_8(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_expand_gray_1_2_4_to_8_mod( + PNG_CONST image_transform *this, image_pixel *that, png_structp pp, + PNG_CONST transform_display *display) +{ + image_transform_png_set_expand_mod(this, that, pp, display); +} + +static int +image_transform_png_set_expand_gray_1_2_4_to_8_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + return image_transform_png_set_expand_add(this, that, colour_type, + bit_depth); +} + +IT(expand_gray_1_2_4_to_8, expand); + +/* png_set_strip_16 */ +static void +image_transform_png_set_strip_16_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_strip_16(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_strip_16_mod(PNG_CONST image_transform *this, + image_pixel *that, png_structp pp, PNG_CONST transform_display *display) +{ + if (that->bit_depth == 16) + { + that->sample_depth = that->bit_depth = 8; + if (that->red_sBIT > 8) that->red_sBIT = 8; + if (that->green_sBIT > 8) that->green_sBIT = 8; + if (that->blue_sBIT > 8) that->blue_sBIT = 8; + if (that->alpha_sBIT > 8) that->alpha_sBIT = 8; + +# ifndef PNG_READ_16_TO_8_ACCURATE_SCALE_SUPPORTED + /* The strip 16 algoirithm drops the low 8 bits rather than calculating + * 1/257, so we need to adjust the permitted errors appropriately: + */ + { + PNG_CONST double d = (255-128.5)/65535; + that->rede += d; + that->greene += d; + that->bluee += d; + that->alphae += d; + } +# endif + } + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_strip_16_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(colour_type) + + this->next = *that; + *that = this; + + return bit_depth > 8; +} + +IT(strip_16, expand_gray_1_2_4_to_8); + +/* png_set_strip_alpha */ +static void +image_transform_png_set_strip_alpha_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_strip_alpha(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_strip_alpha_mod(PNG_CONST image_transform *this, + image_pixel *that, png_structp pp, PNG_CONST transform_display *display) +{ + if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) + that->colour_type = PNG_COLOR_TYPE_GRAY; + else if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) + that->colour_type = PNG_COLOR_TYPE_RGB; + + that->have_tRNS = 0; + that->alphaf = 1; + that->alphae = 0; + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_strip_alpha_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return (colour_type & PNG_COLOR_MASK_ALPHA) != 0; +} + +IT(strip_alpha,strip_16); + +/* png_set_rgb_to_gray(png_structp, int err_action, double red, double green) + * png_set_rgb_to_gray_fixed(png_structp, int err_action, png_fixed_point red, + * png_fixed_point green) + * png_get_rgb_to_gray_status + * + * At present the APIs are simply tested using the 16.16 fixed point conversion + * values known to be used inside libpng: + * + * red: 6968 + * green: 23434 + * blue: 2366 + * + * NOTE: this currently ignores the gamma because no gamma is being set, the + * tests on gamma need to happen in the gamma test set. + */ +static void +image_transform_png_set_rgb_to_gray_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + PNG_CONST int error_action = 1; /* no error, no defines in png.h */ + +# ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_rgb_to_gray(pp, error_action, -1, -1); +# else + png_set_rgb_to_gray_fixed(pp, error_action, -1, -1); +# endif + + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_rgb_to_gray_mod(PNG_CONST image_transform *this, + image_pixel *that, png_structp pp, PNG_CONST transform_display *display) +{ + if ((that->colour_type & PNG_COLOR_MASK_COLOR) != 0) + { + if (that->colour_type == PNG_COLOR_TYPE_PALETTE) + image_pixel_convert_PLTE(that, &display->this); + + /* Image now has RGB channels... */ + that->bluef = that->greenf = that->redf = (that->redf * 6968 + + that->greenf * 23434 + that->bluef * 2366) / 32768; + that->bluee = that->greene = that->rede = (that->rede * 6968 + + that->greene * 23434 + that->bluee * 2366) / 32768 * + (1 + DBL_EPSILON * 6); + + /* The sBIT is the minium of the three colour channel sBITs. */ + if (that->red_sBIT > that->green_sBIT) + that->red_sBIT = that->green_sBIT; + if (that->red_sBIT > that->blue_sBIT) + that->red_sBIT = that->blue_sBIT; + that->blue_sBIT = that->green_sBIT = that->red_sBIT; + + /* And zap the colour bit in the type: */ + if (that->colour_type == PNG_COLOR_TYPE_RGB) + that->colour_type = PNG_COLOR_TYPE_GRAY; + else if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) + that->colour_type = PNG_COLOR_TYPE_GRAY_ALPHA; + } + + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_rgb_to_gray_add(image_transform *this, + PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) +{ + UNUSED(bit_depth) + + this->next = *that; + *that = this; + + return (colour_type & PNG_COLOR_MASK_COLOR) != 0; +} + +IT(rgb_to_gray,strip_alpha); + +/* png_set_background(png_structp, png_const_color_16p background_color, + * int background_gamma_code, int need_expand, double background_gamma) + * png_set_background_fixed(png_structp, png_const_color_16p background_color, + * int background_gamma_code, int need_expand, + * png_fixed_point background_gamma) + * + * As with rgb_to_gray this ignores the gamma. +*/ +static void +image_transform_png_set_background_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_color_16 back; + + /* Since we don't know the output bit depth at this point we must use the + * input values and ask libpng to expand the chunk as required. + */ + back.index = 255; /* Should not be used */ + back.gray = back.blue = back.green = back.red = + (png_uint_16)((1U << that->this.bit_depth) >> 1); + +# ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_background(pp, &back, PNG_BACKGROUND_GAMMA_FILE, 1, 0); +# else + png_set_background_fixed(pp, &back, PNG_BACKGROUND_GAMMA_FILE, 1, 0); +# endif + + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_background_mod(PNG_CONST image_transform *this, + image_pixel *that, png_structp pp, PNG_CONST transform_display *display) +{ + /* Check for tRNS first: */ + if (that->have_tRNS && that->colour_type != PNG_COLOR_TYPE_PALETTE) + image_pixel_add_alpha(that, &display->this); + + /* This is only necessary if the alpha value is less than 1. */ + if (that->alphaf < 1) + { + /* Repeat the calculation above and scale the result: */ + unsigned int tmp = (1U << display->this.bit_depth); + double component = (tmp >> 1)/(double)(tmp-1); + + /* Now we do the background calculation without any gamma correction. */ + if (that->alphaf <= 0) + { + that->bluef = that->greenf = that->redf = component; + that->bluee = that->greene = that->rede = component * DBL_EPSILON; + that->blue_sBIT = that->green_sBIT = that->red_sBIT = that->bit_depth; + } + + else + { + component *= 1-that->alphaf; + that->redf = that->redf * that->alphaf + component; + that->rede = that->rede * that->alphaf + that->redf * 3 * DBL_EPSILON; + that->greenf = that->greenf * that->alphaf + component; + that->greene = that->greene * that->alphaf + that->greenf * 3 * + DBL_EPSILON; + that->bluef = that->bluef * that->alphaf + component; + that->bluee = that->bluee * that->alphaf + that->bluef * 3 * + DBL_EPSILON; + } + + /* Remove the alpha type and set the alpha. */ + that->alphaf = 1; + that->alphae = 0; + + if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) + that->colour_type = PNG_COLOR_TYPE_RGB; + else if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) + that->colour_type = PNG_COLOR_TYPE_GRAY; + } + + this->next->mod(this->next, that, pp, display); +} + +#define image_transform_png_set_background_add image_transform_default_add + +IT(background,rgb_to_gray); + +static image_transform *PNG_CONST image_transform_first = &ITSTRUCT(background); + +static void +transform_enable(PNG_CONST char *name) +{ + /* Everything starts out enabled, so if we see an 'enable' disabled + * everything else the first time round. + */ + static int all_disabled = 0; + int found_it = 0; + image_transform *list = image_transform_first; + + while (list != &image_transform_end) + { + if (strcmp(list->name, name) == 0) + { + list->enable = 1; + found_it = 1; + } + else if (!all_disabled) + list->enable = 0; + + list = list->list; + } + + all_disabled = 1; + + if (!found_it) + { + fprintf(stderr, "pngvalid: --transform-enable=%s: unknown transform\n", + name); + exit(1); + } +} + +static void +transform_disable(PNG_CONST char *name) +{ + image_transform *list = image_transform_first; + + while (list != &image_transform_end) + { + if (strcmp(list->name, name) == 0) + { + list->enable = 0; + return; + } + + list = list->list; + } + + fprintf(stderr, "pngvalid: --transform-disable=%s: unknown transform\n", + name); + exit(1); +} + +static void +image_transform_reset_count(void) +{ + image_transform *next = image_transform_first; + int count = 0; + + while (next != &image_transform_end) + { + next->local_use = 0; + next->next = 0; + next = next->list; + ++count; + } + + /* This can only happen if we every have more than 32 transforms (excluding + * the end) in the list. + */ + if (count > 32) abort(); +} + +static int +image_transform_test_counter(png_uint_32 counter, unsigned int max) +{ + /* Test the list to see if there is any point contining, given a current + * counter and a 'max' value. + */ + image_transform *next = image_transform_first; + + while (next != &image_transform_end) + { + /* For max 0 or 1 continue until the counter overflows: */ + counter >>= 1; + + /* Continue if any entry hasn't reacked the max. */ + if (max > 1 && next->local_use < max) + return 1; + next = next->list; + } + + return max <= 1 && counter == 0; +} + +static png_uint_32 +image_transform_add(PNG_CONST image_transform **this, unsigned int max, + png_uint_32 counter, char *name, size_t sizeof_name, size_t *pos, + png_byte colour_type, png_byte bit_depth) +{ + for (;;) /* until we manage to add something */ + { + png_uint_32 mask; + image_transform *list; + + /* Find the next counter value, if the counter is zero this is the start + * of the list. This routine always returns the current counter (not the + * next) so it returns 0 at the end and expects 0 at the beginning. + */ + if (counter == 0) /* first time */ + { + image_transform_reset_count(); + if (max <= 1) + counter = 1; + else + counter = random_32(); + } + else /* advance the counter */ + { + switch (max) + { + case 0: ++counter; break; + case 1: counter <<= 1; break; + default: counter = random_32(); break; + } + } + + /* Now add all these items, if possible */ + *this = &image_transform_end; + list = image_transform_first; + mask = 1; + + /* Go through the whole list adding anything that the counter selects: */ + while (list != &image_transform_end) + { + if ((counter & mask) != 0 && list->enable && + (max == 0 || list->local_use < max)) + { + /* Candidate to add: */ + if (list->add(list, this, colour_type, bit_depth) || max == 0) + { + /* Added, so add to the name too. */ + *pos = safecat(name, sizeof_name, *pos, " +"); + *pos = safecat(name, sizeof_name, *pos, list->name); + } + + else + { + /* Not useful and max>0, so remvoe it from *this: */ + *this = list->next; + list->next = 0; + + /* And, since we know it isn't useful, stop it being added again + * in this run: + */ + list->local_use = max; + } + } + + mask <<= 1; + list = list->list; + } + + /* Now if anything was added we have something to do. */ + if (*this != &image_transform_end) + return counter; + + /* Nothing added, but was there anything in there to add? */ + if (!image_transform_test_counter(counter, max)) + return 0; + } +} + +#ifdef THIS_IS_THE_PROFORMA +static void +image_transform_png_set_@_set(PNG_CONST image_transform *this, + transform_display *that, png_structp pp, png_infop pi) +{ + png_set_@(pp); + this->next->set(this->next, that, pp, pi); +} + +static void +image_transform_png_set_@_mod(PNG_CONST image_transform *this, + image_pixel *that, png_structp pp, PNG_CONST transform_display *display) +{ + this->next->mod(this->next, that, pp, display); +} + +static int +image_transform_png_set_@_add(image_transform *this, + PNG_CONST image_transform **that, char *name, size_t sizeof_name, + size_t *pos, png_byte colour_type, png_byte bit_depth) +{ + this->next = *that; + *that = this; + + *pos = safecat(name, sizeof_name, *pos, " +@"); + + return 1; +} + +IT(@); +#endif + +/* png_set_quantize(png_structp, png_colorp palette, int num_palette, + * int maximum_colors, png_const_uint_16p histogram, int full_quantize) + * + * Very difficult to validate this! + */ +/*NOTE: TBD NYI */ + +/* The data layout transforms are handled by swapping our own channel data, + * necessarily these need to happen at the end of the transform list because the + * semantic of the channels changes after these are executed. Some of these, + * like set_shift and set_packing, can't be done at present because they change + * the layout of the data at the sub-sample level so sample() won't get the + * right answer. + */ +/* png_set_invert_alpha */ +/*NOTE: TBD NYI */ + +/* png_set_bgr */ +/*NOTE: TBD NYI */ + +/* png_set_swap_alpha */ +/*NOTE: TBD NYI */ + +/* png_set_swap */ +/*NOTE: TBD NYI */ + +/* png_set_filler, (png_structp png_ptr, png_uint_32 filler, int flags)); */ +/*NOTE: TBD NYI */ + +/* png_set_add_alpha, (png_structp png_ptr, png_uint_32 filler, int flags)); */ +/*NOTE: TBD NYI */ + +/* png_set_packing */ +/*NOTE: TBD NYI */ + +/* png_set_packswap */ +/*NOTE: TBD NYI */ + +/* png_set_invert_mono */ +/*NOTE: TBD NYI */ + +/* png_set_shift(png_structp, png_const_color_8p true_bits) */ +/*NOTE: TBD NYI */ + +static int +test_transform(png_modifier* PNG_CONST pm, png_byte PNG_CONST colour_type, + int bdlo, int PNG_CONST bdhi, png_uint_32 max) +{ + for (; bdlo <= bdhi; ++bdlo) + { + PNG_CONST png_byte bit_depth = DEPTH(bdlo); + png_uint_32 counter = 0; + size_t base_pos; + char name[64]; + + base_pos = safecat(name, sizeof name, 0, "transform:"); + + for (;;) + { + size_t pos = base_pos; + PNG_CONST image_transform *list = 0; + + counter = image_transform_add(&list, max, counter, name, sizeof name, + &pos, colour_type, bit_depth); + + if (counter == 0) + break; + + /* The command line can change this to checking interlaced images. */ + transform_test(pm, FILEID(colour_type, bit_depth, pm->interlace_type, + 0, 0, 0), list, name); + + if (fail(pm)) + return 0; + } + } + + return 1; /* keep going */ +} + +static void +perform_transform_test(png_modifier *pm) +{ + /* Test each colour type over the valid range of bit depths (expressed as + * log2(bit_depth) in turn, stop as soon as any error is detected. + */ + if (!test_transform(pm, 0, 0, READ_BDHI, 1)) + return; + + if (!test_transform(pm, 2, 3, READ_BDHI, 1)) + return; + + if (!test_transform(pm, 3, 0, 3, 1)) + return; + + if (!test_transform(pm, 4, 3, READ_BDHI, 1)) + return; + + if (!test_transform(pm, 6, 3, READ_BDHI, 1)) + return; +} + + +/********************************* GAMMA TESTS ********************************/ +/* Gamma test images. */ +typedef struct gamma_modification +{ + png_modification this; + png_fixed_point gamma; +} gamma_modification; + +static int +gamma_modify(png_modifier *pm, png_modification *me, int add) +{ + UNUSED(add) + /* This simply dumps the given gamma value into the buffer. */ + png_save_uint_32(pm->buffer, 4); + png_save_uint_32(pm->buffer+4, CHUNK_gAMA); + png_save_uint_32(pm->buffer+8, ((gamma_modification*)me)->gamma); + return 1; +} + +static void +gamma_modification_init(gamma_modification *me, png_modifier *pm, double gammad) +{ + double g; + + modification_init(&me->this); + me->this.chunk = CHUNK_gAMA; + me->this.modify_fn = gamma_modify; + me->this.add = CHUNK_PLTE; + g = floor(gammad * 100000 + .5); + me->gamma = (png_fixed_point)g; + me->this.next = pm->modifications; + pm->modifications = &me->this; +} + +typedef struct srgb_modification +{ + png_modification this; + png_byte intent; +} srgb_modification; + +static int +srgb_modify(png_modifier *pm, png_modification *me, int add) +{ + UNUSED(add) + /* As above, ignore add and just make a new chunk */ + png_save_uint_32(pm->buffer, 1); + png_save_uint_32(pm->buffer+4, CHUNK_sRGB); + pm->buffer[8] = ((srgb_modification*)me)->intent; + return 1; +} + +static void +srgb_modification_init(srgb_modification *me, png_modifier *pm, png_byte intent) +{ + modification_init(&me->this); + me->this.chunk = CHUNK_sBIT; + + if (intent <= 3) /* if valid, else *delete* sRGB chunks */ + { + me->this.modify_fn = srgb_modify; + me->this.add = CHUNK_PLTE; + me->intent = intent; + } + + else + { + me->this.modify_fn = 0; + me->this.add = 0; + me->intent = 0; + } + + me->this.next = pm->modifications; + pm->modifications = &me->this; +} + +typedef struct sbit_modification +{ + png_modification this; + png_byte sbit; +} sbit_modification; + +static int +sbit_modify(png_modifier *pm, png_modification *me, int add) +{ + png_byte sbit = ((sbit_modification*)me)->sbit; + if (pm->bit_depth > sbit) + { + int cb = 0; + switch (pm->colour_type) + { + case 0: + cb = 1; + break; + + case 2: + case 3: + cb = 3; + break; + + case 4: + cb = 2; + break; + + case 6: + cb = 4; + break; + + default: + png_error(pm->this.pread, + "unexpected colour type in sBIT modification"); + } + + png_save_uint_32(pm->buffer, cb); + png_save_uint_32(pm->buffer+4, CHUNK_sBIT); + + while (cb > 0) + (pm->buffer+8)[--cb] = sbit; + + return 1; + } + else if (!add) + { + /* Remove the sBIT chunk */ + pm->buffer_count = pm->buffer_position = 0; + return 1; + } + else + return 0; /* do nothing */ +} + +static void +sbit_modification_init(sbit_modification *me, png_modifier *pm, png_byte sbit) +{ + modification_init(&me->this); + me->this.chunk = CHUNK_sBIT; + me->this.modify_fn = sbit_modify; + me->this.add = CHUNK_PLTE; + me->sbit = sbit; + me->this.next = pm->modifications; + pm->modifications = &me->this; +} + +/* Reader callbacks and implementations, where they differ from the standard + * ones. + */ +typedef struct gamma_display +{ + standard_display this; + + /* Parameters */ + png_modifier* pm; + double file_gamma; + double screen_gamma; + png_byte sbit; + int threshold_test; + PNG_CONST char* name; + int speed; + int use_input_precision; + int strip16; + + /* Local variables */ + double maxerrout; + double maxerrpc; + double maxerrabs; +} gamma_display; + +static void +gamma_display_init(gamma_display *dp, png_modifier *pm, png_uint_32 id, + double file_gamma, double screen_gamma, png_byte sbit, int threshold_test, + int speed, int use_input_precision, int strip16) +{ + /* Standard fields */ + standard_display_init(&dp->this, &pm->this, id, 0/*do_interlace*/); + + /* Parameter fields */ + dp->pm = pm; + dp->file_gamma = file_gamma; + dp->screen_gamma = screen_gamma; + dp->sbit = sbit; + dp->threshold_test = threshold_test; + dp->speed = speed; + dp->use_input_precision = use_input_precision; + dp->strip16 = strip16; + + /* Local variable fields */ + dp->maxerrout = dp->maxerrpc = dp->maxerrabs = 0; +} + +static void +gamma_info_imp(gamma_display *dp, png_structp pp, png_infop pi) +{ + /* Reuse the standard stuff as appropriate. */ + standard_info_part1(&dp->this, pp, pi); + + /* If requested strip 16 to 8 bits - this is handled automagically below + * because the output bit depth is read from the library. Note that there + * are interactions with sBIT but, internally, libpng makes sbit at most + * PNG_MAX_GAMMA_8 when doing the following. + */ + if (dp->strip16) +# ifdef PNG_READ_16_TO_8_SUPPORTED + png_set_strip_16(pp); +# else + png_error(pp, "strip16 (16 to 8 bit conversion) not supported"); +# endif + + png_read_update_info(pp, pi); + + /* Now we may get a different cbRow: */ + standard_info_part2(&dp->this, pp, pi, 1 /*images*/); +} + +static void +gamma_info(png_structp pp, png_infop pi) +{ + gamma_info_imp(png_get_progressive_ptr(pp), pp, pi); +} + +static void +gamma_image_validate(gamma_display *dp, png_structp pp, png_infop pi, + png_const_bytep pRow) +{ + /* Get some constants derived from the input and output file formats: */ + PNG_CONST png_byte sbit = dp->sbit; + PNG_CONST double file_gamma = dp->file_gamma; + PNG_CONST double screen_gamma = dp->screen_gamma; + PNG_CONST int use_input_precision = dp->use_input_precision; + PNG_CONST int speed = dp->speed; + PNG_CONST png_byte in_ct = dp->this.colour_type; + PNG_CONST png_byte in_bd = dp->this.bit_depth; + PNG_CONST png_uint_32 w = dp->this.w; + PNG_CONST png_uint_32 h = dp->this.h; + PNG_CONST size_t cbRow = dp->this.cbRow; + PNG_CONST png_byte out_ct = png_get_color_type(pp, pi); + PNG_CONST png_byte out_bd = png_get_bit_depth(pp, pi); + PNG_CONST unsigned int outmax = (1U<pm, out_bd); + PNG_CONST double maxout = outerr(dp->pm, out_bd); + PNG_CONST double maxpc = pcerr(dp->pm, out_bd); + + /* There are three sources of error, firstly the quantization in the + * file encoding, determined by sbit and/or the file depth, secondly + * the output (screen) gamma and thirdly the output file encoding. + * + * Since this API receives the screen and file gamma in double + * precision it is possible to calculate an exact answer given an input + * pixel value. Therefore we assume that the *input* value is exact - + * sample/maxsample - calculate the corresponding gamma corrected + * output to the limits of double precision arithmetic and compare with + * what libpng returns. + * + * Since the library must quantize the output to 8 or 16 bits there is + * a fundamental limit on the accuracy of the output of +/-.5 - this + * quantization limit is included in addition to the other limits + * specified by the paramaters to the API. (Effectively, add .5 + * everywhere.) + * + * The behavior of the 'sbit' paramter is defined by section 12.5 + * (sample depth scaling) of the PNG spec. That section forces the + * decoder to assume that the PNG values have been scaled if sBIT is + * present: + * + * png-sample = floor( input-sample * (max-out/max-in) + .5); + * + * This means that only a subset of the possible PNG values should + * appear in the input. However, the spec allows the encoder to use a + * variety of approximations to the above and doesn't require any + * restriction of the values produced. + * + * Nevertheless the spec requires that the upper 'sBIT' bits of the + * value stored in a PNG file be the original sample bits. + * Consequently the code below simply scales the top sbit bits by + * (1<= + PNG_GAMMA_THRESHOLD && !dp->threshold_test && !speed && in_ct != 3) || + in_bd != out_bd; + + PNG_CONST unsigned int samples_per_pixel = (out_ct & 2U) ? 3U : 1U; + + PNG_CONST double gamma_correction = 1/(file_gamma*screen_gamma);/* Overall */ + + double maxerrout = 0, maxerrabs = 0, maxerrpc = 0; + png_uint_32 y; + + for (y=0; y> (in_bd-sbit); + + double i, input_sample, encoded_sample, output; + double encoded_error, error; + double es_lo, es_hi; + + /* First check on the 'perfect' result obtained from the + * digitized input value, id, and compare this against the + * actual digitized result, 'od'. 'i' is the input result + * in the range 0..1: + * + * NOTE: sBIT should be taken into account here but isn't, + * as described above. + */ + i = isbit; i /= (1U< maxerrout) + maxerrout = encoded_error; + + if (encoded_error < .5+maxout) + continue; + + /* There may be an error, so calculate the actual sample + * values - unencoded light intensity values. Note that + * in practice these are not unencoded because they + * include a 'viewing correction' to decrease or + * (normally) increase the perceptual contrast of the + * image. There's nothing we can do about this - we don't + * know what it is - so assume the unencoded value is + * perceptually linear. + */ + input_sample = pow(i, 1/file_gamma); /* In range 0..1 */ + output = od; + output /= outmax; + output = pow(output, screen_gamma); + + /* Now we have the numbers for real errors, both absolute + * values as as a percentage of the correct value (output): + */ + error = fabs(input_sample-output); + + if (error > maxerrabs) + maxerrabs = error; + + /* The following is an attempt to ignore the tendency of + * quantization to dominate the percentage errors for low + * output sample values: + */ + if (input_sample*maxpc > .5+maxabs) + { + double percentage_error = error/input_sample; + if (percentage_error > maxerrpc) maxerrpc = percentage_error; + } + + /* Now calculate the digitization limits for + * 'encoded_sample' using the 'max' values. Note that + * maxout is in the encoded space but maxpc and maxabs are + * in linear light space. + * + * First find the maximum error in linear light space, + * range 0..1: + */ + { + double tmp = input_sample * maxpc; + if (tmp < maxabs) tmp = maxabs; + + /* Low bound - the minimum of the three: */ + es_lo = encoded_sample - maxout; + + if (es_lo > 0 && input_sample-tmp > 0) + { + double low_value = outmax * pow(input_sample-tmp, + 1/screen_gamma); + if (low_value < es_lo) es_lo = low_value; + } + + else + es_lo = 0; + + es_hi = encoded_sample + maxout; + + if (es_hi < outmax && input_sample+tmp < 1) + { + double high_value = outmax * pow(input_sample+tmp, + 1/screen_gamma); + if (high_value > es_hi) es_hi = high_value; + } + + else + es_hi = outmax; + } + + /* The primary test is that the final encoded value + * returned by the library should be between the two limits + * (inclusive) that were calculated above. At this point + * quantization of the output must be taken into account. + */ + if (od+.5 < es_lo || od-.5 > es_hi) + { + /* There has been an error in processing. */ + double is_lo, is_hi; + + if (use_input_precision) + { + /* Ok, something is wrong - this actually happens in + * current libpng sbit processing. Assume that the + * input value (id, adjusted for sbit) can be + * anywhere between value-.5 and value+.5 - quite a + * large range if sbit is low. + */ + double tmp = (isbit - .5)/((1U< 0) + { + is_lo = outmax * pow(tmp, gamma_correction) - maxout; + if (is_lo < 0) is_lo = 0; + } + + else + is_lo = 0; + + tmp = (isbit + .5)/((1U< outmax) is_hi = outmax; + } + + else + is_hi = outmax; + + if (!(od+.5 < is_lo || od-.5 > is_hi)) + continue; + } + else + is_lo = es_lo, is_hi = es_hi; + + { + char msg[256]; + + sprintf(msg, + "error: %.3f; %u{%u;%u} -> %u not %.2f (%.1f-%.1f)", + od-encoded_sample, id, sbit, isbit, od, + encoded_sample, is_lo, is_hi); + + png_warning(pp, msg); + } + } + } + } + + else if (!speed && memcmp(std, pRow, cbRow) != 0) + { + char msg[64]; + + /* No transform is expected on the threshold tests. */ + sprintf(msg, "gamma: below threshold row %d changed", y); + + png_error(pp, msg); + } + } /* row (y) loop */ + + dp->maxerrout = maxerrout; + dp->maxerrabs = maxerrabs; + dp->maxerrpc = maxerrpc; + dp->this.ps->validated = 1; +} + +static void +gamma_end(png_structp pp, png_infop pi) +{ + gamma_display *dp = png_get_progressive_ptr(pp); + + gamma_image_validate(dp, pp, pi, dp->this.ps->image); +} + +/* A single test run checking a gamma transformation. + * + * maxabs: maximum absolute error as a fraction + * maxout: maximum output error in the output units + * maxpc: maximum percentage error (as a percentage) + */ +static void +gamma_test(png_modifier *pmIn, PNG_CONST png_byte colour_typeIn, + PNG_CONST png_byte bit_depthIn, PNG_CONST int interlace_typeIn, + PNG_CONST double file_gammaIn, PNG_CONST double screen_gammaIn, + PNG_CONST png_byte sbitIn, PNG_CONST int threshold_testIn, + PNG_CONST char *name, PNG_CONST int speedIn, + PNG_CONST int use_input_precisionIn, PNG_CONST int strip16In) +{ + gamma_display d; + context(&pmIn->this, fault); + + gamma_display_init(&d, pmIn, FILEID(colour_typeIn, bit_depthIn, + interlace_typeIn, 0, 0, 0), file_gammaIn, screen_gammaIn, sbitIn, + threshold_testIn, speedIn, use_input_precisionIn, strip16In); + + Try + { + png_structp pp; + png_infop pi; + gamma_modification gamma_mod; + srgb_modification srgb_mod; + sbit_modification sbit_mod; + + /* Make an appropriate modifier to set the PNG file gamma to the + * given gamma value and the sBIT chunk to the given precision. + */ + d.pm->modifications = NULL; + gamma_modification_init(&gamma_mod, d.pm, d.file_gamma); + srgb_modification_init(&srgb_mod, d.pm, 127 /*delete*/); + sbit_modification_init(&sbit_mod, d.pm, d.sbit); + + modification_reset(d.pm->modifications); + + /* Get a png_struct for writing the image. */ + pp = set_modifier_for_read(d.pm, &pi, d.this.id, name); + + /* Set up gamma processing. */ +#ifdef PNG_FLOATING_POINT_SUPPORTED + png_set_gamma(pp, d.screen_gamma, d.file_gamma); +#else + { + png_fixed_point s = floor(d.screen_gamma*100000+.5); + png_fixed_point f = floor(d.file_gamma*100000+.5); + png_set_gamma_fixed(pp, s, f); + } +#endif + + /* Introduce the correct read function. */ + if (d.pm->this.progressive) + { + /* Share the row function with the standard implementation. */ + png_set_progressive_read_fn(pp, &d, gamma_info, progressive_row, + gamma_end); + + /* Now feed data into the reader until we reach the end: */ + modifier_progressive_read(d.pm, pp, pi); + } + else + { + /* modifier_read expects a png_modifier* */ + png_set_read_fn(pp, d.pm, modifier_read); + + /* Check the header values: */ + png_read_info(pp, pi); + + /* Process the 'info' requirements. Only one image is generated */ + gamma_info_imp(&d, pp, pi); + + sequential_row(&d.this, pp, pi, NULL, d.this.ps->image); + + gamma_image_validate(&d, pp, pi, d.this.ps->image); + } + + modifier_reset(d.pm); + + if (d.pm->log && !d.threshold_test && !d.speed) + fprintf(stderr, "%d bit %s %s: max error %f (%.2g, %2g%%)\n", + d.this.bit_depth, colour_types[d.this.colour_type], d.name, + d.maxerrout, d.maxerrabs, 100*d.maxerrpc); + + /* Log the summary values too. */ + if (d.this.colour_type == 0 || d.this.colour_type == 4) + { + switch (d.this.bit_depth) + { + case 1: + break; + + case 2: + if (d.maxerrout > d.pm->error_gray_2) + d.pm->error_gray_2 = d.maxerrout; + + break; + + case 4: + if (d.maxerrout > d.pm->error_gray_4) + d.pm->error_gray_4 = d.maxerrout; + + break; + + case 8: + if (d.maxerrout > d.pm->error_gray_8) + d.pm->error_gray_8 = d.maxerrout; + + break; + + case 16: + if (d.maxerrout > d.pm->error_gray_16) + d.pm->error_gray_16 = d.maxerrout; + + break; + + default: + png_error(pp, "bad bit depth (internal: 1)"); + } + } + + else if (d.this.colour_type == 2 || d.this.colour_type == 6) + { + switch (d.this.bit_depth) + { + case 8: + + if (d.maxerrout > d.pm->error_color_8) + d.pm->error_color_8 = d.maxerrout; + + break; + + case 16: + + if (d.maxerrout > d.pm->error_color_16) + d.pm->error_color_16 = d.maxerrout; + + break; + + default: + png_error(pp, "bad bit depth (internal: 2)"); + } + } + } + + Catch(fault) + modifier_reset((png_modifier*)fault); +} + +static void gamma_threshold_test(png_modifier *pm, png_byte colour_type, + png_byte bit_depth, int interlace_type, double file_gamma, + double screen_gamma) +{ + size_t pos = 0; + char name[64]; + pos = safecat(name, sizeof name, pos, "threshold "); + pos = safecatd(name, sizeof name, pos, file_gamma, 3); + pos = safecat(name, sizeof name, pos, "/"); + pos = safecatd(name, sizeof name, pos, screen_gamma, 3); + + (void)gamma_test(pm, colour_type, bit_depth, interlace_type, file_gamma, + screen_gamma, bit_depth, 1, name, 0 /*speed*/, 0 /*no input precision*/, + 0 /*no strip16*/); +} + +static void +perform_gamma_threshold_tests(png_modifier *pm) +{ + png_byte colour_type = 0; + png_byte bit_depth = 0; + + while (next_format(&colour_type, &bit_depth)) + { + double test_gamma = 1.0; + while (test_gamma >= .4) + { + /* There's little point testing the interlacing vs non-interlacing, + * but this can be set from the command line. + */ + gamma_threshold_test(pm, colour_type, bit_depth, pm->interlace_type, + test_gamma, 1/test_gamma); + test_gamma *= .95; + } + + /* And a special test for sRGB */ + gamma_threshold_test(pm, colour_type, bit_depth, pm->interlace_type, + .45455, 2.2); + + if (fail(pm)) + return; + } +} + +static void gamma_transform_test(png_modifier *pm, + PNG_CONST png_byte colour_type, PNG_CONST png_byte bit_depth, + PNG_CONST int interlace_type, PNG_CONST double file_gamma, + PNG_CONST double screen_gamma, PNG_CONST png_byte sbit, PNG_CONST int speed, + PNG_CONST int use_input_precision, PNG_CONST int strip16) +{ + size_t pos = 0; + char name[64]; + + if (sbit != bit_depth) + { + pos = safecat(name, sizeof name, pos, "sbit("); + pos = safecatn(name, sizeof name, pos, sbit); + pos = safecat(name, sizeof name, pos, ") "); + } + + else + pos = safecat(name, sizeof name, pos, "gamma "); + + if (strip16) + pos = safecat(name, sizeof name, pos, "16to8 "); + + pos = safecatd(name, sizeof name, pos, file_gamma, 3); + pos = safecat(name, sizeof name, pos, "->"); + pos = safecatd(name, sizeof name, pos, screen_gamma, 3); + + gamma_test(pm, colour_type, bit_depth, interlace_type, file_gamma, + screen_gamma, sbit, 0, name, speed, use_input_precision, strip16); +} + +static void perform_gamma_transform_tests(png_modifier *pm, int speed) +{ + png_byte colour_type = 0; + png_byte bit_depth = 0; + + /* Ignore palette images - the gamma correction happens on the palette entry, + * haven't got the tests for this yet. + */ + while (next_format(&colour_type, &bit_depth)) if (colour_type != 3) + { + unsigned int i, j; + + for (i=0; ingammas; ++i) for (j=0; jngammas; ++j) if (i != j) + { + gamma_transform_test(pm, colour_type, bit_depth, pm->interlace_type, + 1/pm->gammas[i], pm->gammas[j], bit_depth, speed, + pm->use_input_precision, 0 /*do not strip16*/); + + if (fail(pm)) + return; + } + } +} + +static void perform_gamma_sbit_tests(png_modifier *pm, int speed) +{ + png_byte sbit; + + /* The only interesting cases are colour and grayscale, alpha is ignored here + * for overall speed. Only bit depths 8 and 16 are tested. + */ + for (sbit=pm->sbitlow; sbit<(1<ngammas; ++i) + { + for (j=0; jngammas; ++j) + { + if (i != j) + { + if (sbit < 8) + { + gamma_transform_test(pm, 0, 8, pm->interlace_type, + 1/pm->gammas[i], pm->gammas[j], sbit, speed, + pm->use_input_precision_sbit, 0 /*strip16*/); + + if (fail(pm)) + return; + + gamma_transform_test(pm, 2, 8, pm->interlace_type, + 1/pm->gammas[i], pm->gammas[j], sbit, speed, + pm->use_input_precision_sbit, 0 /*strip16*/); + + if (fail(pm)) + return; + } + +#ifdef DO_16BIT + gamma_transform_test(pm, 0, 16, pm->interlace_type, + 1/pm->gammas[i], pm->gammas[j], sbit, speed, + pm->use_input_precision_sbit, 0 /*strip16*/); + + if (fail(pm)) + return; + + gamma_transform_test(pm, 2, 16, pm->interlace_type, + 1/pm->gammas[i], pm->gammas[j], sbit, speed, + pm->use_input_precision_sbit, 0 /*strip16*/); + + if (fail(pm)) + return; +#endif + } + } + } + } +} + +/* Note that this requires a 16 bit source image but produces 8 bit output, so + * we only need the 16bit write support. + */ +#ifdef PNG_READ_16_TO_8_SUPPORTED +static void perform_gamma_strip16_tests(png_modifier *pm, int speed) +{ +# ifndef PNG_MAX_GAMMA_8 +# define PNG_MAX_GAMMA_8 11 +# endif + /* Include the alpha cases here. Note that sbit matches the internal value + * used by the library - otherwise we will get spurious errors from the + * internal sbit style approximation. + * + * The threshold test is here because otherwise the 16 to 8 conversion will + * proceed *without* gamma correction, and the tests above will fail (but not + * by much) - this could be fixed, it only appears with the -g option. + */ + unsigned int i, j; + for (i=0; ingammas; ++i) + { + for (j=0; jngammas; ++j) + { + if (i != j && + fabs(pm->gammas[j]/pm->gammas[i]-1) >= PNG_GAMMA_THRESHOLD) + { + gamma_transform_test(pm, 0, 16, pm->interlace_type, 1/pm->gammas[i], + pm->gammas[j], PNG_MAX_GAMMA_8, speed, + pm->use_input_precision_16to8, 1 /*strip16*/); + + if (fail(pm)) + return; + + gamma_transform_test(pm, 2, 16, pm->interlace_type, 1/pm->gammas[i], + pm->gammas[j], PNG_MAX_GAMMA_8, speed, + pm->use_input_precision_16to8, 1 /*strip16*/); + + if (fail(pm)) + return; + + gamma_transform_test(pm, 4, 16, pm->interlace_type, 1/pm->gammas[i], + pm->gammas[j], PNG_MAX_GAMMA_8, speed, + pm->use_input_precision_16to8, 1 /*strip16*/); + + if (fail(pm)) + return; + + gamma_transform_test(pm, 6, 16, pm->interlace_type, 1/pm->gammas[i], + pm->gammas[j], PNG_MAX_GAMMA_8, speed, + pm->use_input_precision_16to8, 1 /*strip16*/); + + if (fail(pm)) + return; + } + } + } +} +#endif /* 16 to 8 bit conversion */ + +static void +perform_gamma_test(png_modifier *pm, int speed, int summary) +{ + /* First some arbitrary no-transform tests: */ + if (!speed && pm->test_gamma_threshold) + { + perform_gamma_threshold_tests(pm); + + if (fail(pm)) + return; + } + + /* Now some real transforms. */ + if (pm->test_gamma_transform) + { + perform_gamma_transform_tests(pm, speed); + + if (summary) + { + printf("Gamma correction error summary\n\n"); + printf("The printed value is the maximum error in the pixel values\n"); + printf("calculated by the libpng gamma correction code. The error\n"); + printf("is calculated as the difference between the output pixel\n"); + printf("value (always an integer) and the ideal value from the\n"); + printf("libpng specification (typically not an integer).\n\n"); + + printf("Expect this value to be less than .5 for 8 bit formats,\n"); + printf("less than 1 for formats with fewer than 8 bits and a small\n"); + printf("number (typically less than 5) for the 16 bit formats.\n"); + printf("For performance reasons the value for 16 bit formats\n"); + printf("increases when the image file includes an sBIT chunk.\n\n"); + + printf(" 2 bit gray: %.5f\n", pm->error_gray_2); + printf(" 4 bit gray: %.5f\n", pm->error_gray_4); + printf(" 8 bit gray: %.5f\n", pm->error_gray_8); + printf(" 8 bit color: %.5f\n", pm->error_color_8); +#ifdef DO_16BIT + printf(" 16 bit gray: %.5f\n", pm->error_gray_16); + printf(" 16 bit color: %.5f\n", pm->error_color_16); +#endif + } + } + + /* The sbit tests produce much larger errors: */ + if (pm->test_gamma_sbit) + { + pm->error_gray_2 = pm->error_gray_4 = pm->error_gray_8 = + pm->error_gray_16 = pm->error_color_8 = pm->error_color_16 = 0; + perform_gamma_sbit_tests(pm, speed); + + if (summary) + { + printf("Gamma correction with sBIT:\n"); + + if (pm->sbitlow < 8U) + { + printf(" 2 bit gray: %.5f\n", pm->error_gray_2); + printf(" 4 bit gray: %.5f\n", pm->error_gray_4); + printf(" 8 bit gray: %.5f\n", pm->error_gray_8); + printf(" 8 bit color: %.5f\n", pm->error_color_8); + } + + #ifdef DO_16BIT + printf(" 16 bit gray: %.5f\n", pm->error_gray_16); + printf(" 16 bit color: %.5f\n", pm->error_color_16); + #endif + } + } + +#ifdef PNG_READ_16_TO_8_SUPPORTED + if (pm->test_gamma_strip16) + { + /* The 16 to 8 bit strip operations: */ + pm->error_gray_2 = pm->error_gray_4 = pm->error_gray_8 = + pm->error_gray_16 = pm->error_color_8 = pm->error_color_16 = 0; + perform_gamma_strip16_tests(pm, speed); + + if (summary) + { + printf("Gamma correction with 16 to 8 bit reduction:\n"); + printf(" 16 bit gray: %.5f\n", pm->error_gray_16); + printf(" 16 bit color: %.5f\n", pm->error_color_16); + } + } +#endif +} + +/* INTERLACE MACRO VALIDATION */ +/* This is copied verbatim from the specification, it is simply the pass + * number in which each pixel in each 8x8 tile appears. The array must + * be indexed adam7[y][x] and notice that the pass numbers are based at + * 1, not 0 - the base libpng uses. + */ +static PNG_CONST +png_byte adam7[8][8] = +{ + { 1,6,4,6,2,6,4,6 }, + { 7,7,7,7,7,7,7,7 }, + { 5,6,5,6,5,6,5,6 }, + { 7,7,7,7,7,7,7,7 }, + { 3,6,4,6,3,6,4,6 }, + { 7,7,7,7,7,7,7,7 }, + { 5,6,5,6,5,6,5,6 }, + { 7,7,7,7,7,7,7,7 } +}; + +/* This routine validates all the interlace support macros in png.h for + * a variety of valid PNG widths and heights. It uses a number of similarly + * named internal routines that feed off the above array. + */ +static png_uint_32 +png_pass_start_row(int pass) +{ + int x, y; + ++pass; + for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) + return y; + return 0xf; +} + +static png_uint_32 +png_pass_start_col(int pass) +{ + int x, y; + ++pass; + for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) + return x; + return 0xf; +} + +static int +png_pass_row_shift(int pass) +{ + int x, y, base=(-1), inc=8; + ++pass; + for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) + { + if (base == (-1)) + base = y; + else if (base == y) + {} + else if (inc == y-base) + base=y; + else if (inc == 8) + inc = y-base, base=y; + else if (inc != y-base) + return 0xff; /* error - more than one 'inc' value! */ + } + + if (base == (-1)) return 0xfe; /* error - no row in pass! */ + + /* The shift is always 1, 2 or 3 - no pass has all the rows! */ + switch (inc) + { +case 2: return 1; +case 4: return 2; +case 8: return 3; +default: break; + } + + /* error - unrecognized 'inc' */ + return (inc << 8) + 0xfd; +} + +static int +png_pass_col_shift(int pass) +{ + int x, y, base=(-1), inc=8; + ++pass; + for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) + { + if (base == (-1)) + base = x; + else if (base == x) + {} + else if (inc == x-base) + base=x; + else if (inc == 8) + inc = x-base, base=x; + else if (inc != x-base) + return 0xff; /* error - more than one 'inc' value! */ + } + + if (base == (-1)) return 0xfe; /* error - no row in pass! */ + + /* The shift is always 1, 2 or 3 - no pass has all the rows! */ + switch (inc) + { +case 1: return 0; /* pass 7 has all the columns */ +case 2: return 1; +case 4: return 2; +case 8: return 3; +default: break; + } + + /* error - unrecognized 'inc' */ + return (inc << 8) + 0xfd; +} + +static png_uint_32 +png_row_from_pass_row(png_uint_32 yIn, int pass) +{ + /* By examination of the array: */ + switch (pass) + { +case 0: return yIn * 8; +case 1: return yIn * 8; +case 2: return yIn * 8 + 4; +case 3: return yIn * 4; +case 4: return yIn * 4 + 2; +case 5: return yIn * 2; +case 6: return yIn * 2 + 1; +default: break; + } + + return 0xff; /* bad pass number */ +} + +static png_uint_32 +png_col_from_pass_col(png_uint_32 xIn, int pass) +{ + /* By examination of the array: */ + switch (pass) + { +case 0: return xIn * 8; +case 1: return xIn * 8 + 4; +case 2: return xIn * 4; +case 3: return xIn * 4 + 2; +case 4: return xIn * 2; +case 5: return xIn * 2 + 1; +case 6: return xIn; +default: break; + } + + return 0xff; /* bad pass number */ +} + +static int +png_row_in_interlace_pass(png_uint_32 y, int pass) +{ + /* Is row 'y' in pass 'pass'? */ + int x; + y &= 7; + ++pass; + for (x=0; x<8; ++x) if (adam7[y][x] == pass) + return 1; + + return 0; +} + +static int +png_col_in_interlace_pass(png_uint_32 x, int pass) +{ + /* Is column 'x' in pass 'pass'? */ + int y; + x &= 7; + ++pass; + for (y=0; y<8; ++y) if (adam7[y][x] == pass) + return 1; + + return 0; +} + +static png_uint_32 +png_pass_rows(png_uint_32 height, int pass) +{ + png_uint_32 tiles = height>>3; + png_uint_32 rows = 0; + unsigned int x, y; + + height &= 7; + ++pass; + for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) + { + rows += tiles; + if (y < height) ++rows; + break; /* i.e. break the 'x', column, loop. */ + } + + return rows; +} + +static png_uint_32 +png_pass_cols(png_uint_32 width, int pass) +{ + png_uint_32 tiles = width>>3; + png_uint_32 cols = 0; + unsigned int x, y; + + width &= 7; + ++pass; + for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) + { + cols += tiles; + if (x < width) ++cols; + break; /* i.e. break the 'y', row, loop. */ + } + + return cols; +} + +static void +perform_interlace_macro_validation(void) +{ + /* The macros to validate, first those that depend only on pass: + * + * PNG_PASS_START_ROW(pass) + * PNG_PASS_START_COL(pass) + * PNG_PASS_ROW_SHIFT(pass) + * PNG_PASS_COL_SHIFT(pass) + */ + int pass; + + for (pass=0; pass<7; ++pass) + { + png_uint_32 m, f, v; + + m = PNG_PASS_START_ROW(pass); + f = png_pass_start_row(pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_START_ROW(%d) = %u != %x\n", pass, m, f); + exit(1); + } + + m = PNG_PASS_START_COL(pass); + f = png_pass_start_col(pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_START_COL(%d) = %u != %x\n", pass, m, f); + exit(1); + } + + m = PNG_PASS_ROW_SHIFT(pass); + f = png_pass_row_shift(pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_ROW_SHIFT(%d) = %u != %x\n", pass, m, f); + exit(1); + } + + m = PNG_PASS_COL_SHIFT(pass); + f = png_pass_col_shift(pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_COL_SHIFT(%d) = %u != %x\n", pass, m, f); + exit(1); + } + + /* Macros that depend on the image or sub-image height too: + * + * PNG_PASS_ROWS(height, pass) + * PNG_PASS_COLS(width, pass) + * PNG_ROW_FROM_PASS_ROW(yIn, pass) + * PNG_COL_FROM_PASS_COL(xIn, pass) + * PNG_ROW_IN_INTERLACE_PASS(y, pass) + * PNG_COL_IN_INTERLACE_PASS(x, pass) + */ + for (v=0;;) + { + /* First the base 0 stuff: */ + m = PNG_ROW_FROM_PASS_ROW(v, pass); + f = png_row_from_pass_row(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_ROW_FROM_PASS_ROW(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(1); + } + + m = PNG_COL_FROM_PASS_COL(v, pass); + f = png_col_from_pass_col(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_COL_FROM_PASS_COL(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(1); + } + + m = PNG_ROW_IN_INTERLACE_PASS(v, pass); + f = png_row_in_interlace_pass(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_ROW_IN_INTERLACE_PASS(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(1); + } + + m = PNG_COL_IN_INTERLACE_PASS(v, pass); + f = png_col_in_interlace_pass(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_COL_IN_INTERLACE_PASS(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(1); + } + + /* Then the base 1 stuff: */ + ++v; + m = PNG_PASS_ROWS(v, pass); + f = png_pass_rows(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_ROWS(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(1); + } + + m = PNG_PASS_COLS(v, pass); + f = png_pass_cols(v, pass); + if (m != f) + { + fprintf(stderr, "PNG_PASS_COLS(%u, %d) = %u != %x\n", + v, pass, m, f); + exit(1); + } + + /* Move to the next v - the stepping algorithm starts skipping + * values above 1024. + */ + if (v > 1024) + { + if (v == PNG_UINT_31_MAX) + break; + + v = (v << 1) ^ v; + if (v >= PNG_UINT_31_MAX) + v = PNG_UINT_31_MAX-1; + } + } + } +} + +/* main program */ +int main(int argc, PNG_CONST char **argv) +{ + volatile int summary = 1; /* Print the error summary at the end */ + + /* Create the given output file on success: */ + PNG_CONST char *volatile touch = NULL; + + /* This is an array of standard gamma values (believe it or not I've seen + * every one of these mentioned somewhere.) + * + * In the following list the most useful values are first! + */ + static double + gammas[]={2.2, 1.0, 2.2/1.45, 1.8, 1.5, 2.4, 2.5, 2.62, 2.9}; + + png_modifier pm; + context(&pm.this, fault); + + modifier_init(&pm); + + /* Preallocate the image buffer, because we know how big it needs to be, + * note that, for testing purposes, it is deliberately mis-aligned. + */ + pm.this.image = malloc(2*TRANSFORM_IMAGEMAX+1); + + if (pm.this.image != NULL) + { + /* Ignore OOM at this point - the 'ensure' routine above will allocate + * the array appropriately. + */ + ++(pm.this.image); + pm.this.cb_image = 2*TRANSFORM_IMAGEMAX; + } + + /* Default to error on warning: */ + pm.this.treat_warnings_as_errors = 1; + + /* Store the test gammas */ + pm.gammas = gammas; + pm.ngammas = 0; /* default to off */ + pm.sbitlow = 8U; /* because libpng doesn't do sBIT below 8! */ + pm.use_input_precision_16to8 = 1U; /* Because of the way libpng does it */ + + /* Some default values (set the behavior for 'make check' here). + * These values simply control the maximum error permitted in the gamma + * transformations. The practial limits for human perception are described + * below (the setting for maxpc16), however for 8 bit encodings it isn't + * possible to meet the accepted capabilities of human vision - i.e. 8 bit + * images can never be good enough, regardless of encoding. + */ + pm.maxout8 = .1; /* Arithmetic error in *encoded* value */ + pm.maxabs8 = .00005; /* 1/20000 */ + pm.maxpc8 = .499; /* I.e., .499% fractional error */ + pm.maxout16 = .499; /* Error in *encoded* value */ + pm.maxabs16 = .00005;/* 1/20000 */ + + /* NOTE: this is a reasonable perceptual limit. We assume that humans can + * perceive light level differences of 1% over a 100:1 range, so we need to + * maintain 1 in 10000 accuracy (in linear light space), which is what the + * following guarantees. It also allows significantly higher errors at + * higher 16 bit values, which is important for performance. The actual + * maximum 16 bit error is about +/-1.9 in the fixed point implementation but + * this is only allowed for values >38149 by the following: + */ + pm.maxpc16 = .005; /* I.e., 1/200% - 1/20000 */ + + /* Now parse the command line options. */ + while (--argc >= 1) + { + if (strcmp(*++argv, "-v") == 0) + pm.this.verbose = 1; + + else if (strcmp(*argv, "-l") == 0) + pm.log = 1; + + else if (strcmp(*argv, "-q") == 0) + summary = pm.this.verbose = pm.log = 0; + + else if (strcmp(*argv, "-w") == 0) + pm.this.treat_warnings_as_errors = 0; + + else if (strcmp(*argv, "--speed") == 0) + pm.this.speed = 1, pm.ngammas = (sizeof gammas)/(sizeof gammas[0]), + pm.test_standard = 0; + + else if (strcmp(*argv, "--size") == 0) + pm.test_size = 1; + + else if (strcmp(*argv, "--nosize") == 0) + pm.test_size = 0; + + else if (strcmp(*argv, "--standard") == 0) + pm.test_standard = 1; + + else if (strcmp(*argv, "--nostandard") == 0) + pm.test_standard = 0; + + else if (strcmp(*argv, "--transform") == 0) + pm.test_transform = 1; + + else if (strcmp(*argv, "--notransform") == 0) + pm.test_transform = 0; + + else if (strncmp(*argv, "--transform-disable=", + sizeof "--transform-disable") == 0) + { + pm.test_transform = 1; + transform_disable(*argv + sizeof "--transform-disable"); + } + + else if (strncmp(*argv, "--transform-enable=", + sizeof "--transform-enable") == 0) + { + pm.test_transform = 1; + transform_enable(*argv + sizeof "--transform-enable"); + } + + else if (strcmp(*argv, "--gamma") == 0) + { + /* Just do two gamma tests here (2.2 and linear) for speed: */ + pm.ngammas = 2U; + pm.test_gamma_threshold = 1; + pm.test_gamma_transform = 1; + pm.test_gamma_sbit = 1; + pm.test_gamma_strip16 = 1; + } + + else if (strcmp(*argv, "--nogamma") == 0) + pm.ngammas = 0; + + else if (strcmp(*argv, "--gamma-threshold") == 0) + pm.ngammas = 2U, pm.test_gamma_threshold = 1; + + else if (strcmp(*argv, "--nogamma-threshold") == 0) + pm.test_gamma_threshold = 0; + + else if (strcmp(*argv, "--gamma-transform") == 0) + pm.ngammas = 2U, pm.test_gamma_transform = 1; + + else if (strcmp(*argv, "--nogamma-transform") == 0) + pm.test_gamma_transform = 0; + + else if (strcmp(*argv, "--gamma-sbit") == 0) + pm.ngammas = 2U, pm.test_gamma_sbit = 1; + + else if (strcmp(*argv, "--nogamma-sbit") == 0) + pm.test_gamma_sbit = 0; + + else if (strcmp(*argv, "--gamma-16-to-8") == 0) + pm.ngammas = 2U, pm.test_gamma_strip16 = 1; + + else if (strcmp(*argv, "--nogamma-16-to-8") == 0) + pm.test_gamma_strip16 = 0; + + else if (strcmp(*argv, "--all-gammas") == 0) + pm.ngammas = (sizeof gammas)/(sizeof gammas[0]); + + else if (strcmp(*argv, "--progressive-read") == 0) + pm.this.progressive = 1; + + else if (strcmp(*argv, "--interlace") == 0) + pm.interlace_type = PNG_INTERLACE_ADAM7; + + else if (argc >= 1 && strcmp(*argv, "--sbitlow") == 0) + --argc, pm.sbitlow = (png_byte)atoi(*++argv); + + else if (argc >= 1 && strcmp(*argv, "--touch") == 0) + --argc, touch = *++argv; + + else if (argc >= 1 && strncmp(*argv, "--max", 4) == 0) + { + --argc; + + if (strcmp(4+*argv, "abs8") == 0) + pm.maxabs8 = atof(*++argv); + + else if (strcmp(4+*argv, "abs16") == 0) + pm.maxabs16 = atof(*++argv); + + else if (strcmp(4+*argv, "out8") == 0) + pm.maxout8 = atof(*++argv); + + else if (strcmp(4+*argv, "out16") == 0) + pm.maxout16 = atof(*++argv); + + else if (strcmp(4+*argv, "pc8") == 0) + pm.maxpc8 = atof(*++argv); + + else if (strcmp(4+*argv, "pc16") == 0) + pm.maxpc16 = atof(*++argv); + + else + { + fprintf(stderr, "pngvalid: %s: unknown 'max' option\n", *argv); + exit(1); + } + } + + else + { + fprintf(stderr, "pngvalid: %s: unknown argument\n", *argv); + exit(1); + } + } + + /* If pngvalid is run with no arguments default to a reasonable set of the + * tests. + */ + if (pm.test_standard == 0 && pm.test_size == 0 && pm.test_transform == 0 && + pm.ngammas == 0) + { + pm.test_standard = 1; + pm.test_size = 1; + pm.test_transform = 1; + pm.ngammas = 3U; + } + + if (pm.ngammas > 0 && + pm.test_gamma_threshold == 0 && pm.test_gamma_transform == 0 && + pm.test_gamma_sbit == 0 && pm.test_gamma_strip16 == 0) + { + pm.test_gamma_threshold = 1; + pm.test_gamma_transform = 1; + pm.test_gamma_sbit = 1; + pm.test_gamma_strip16 = 1; + } + + else if (pm.ngammas == 0) + { + /* Nothing to test so turn everything off: */ + pm.test_gamma_threshold = 0; + pm.test_gamma_transform = 0; + pm.test_gamma_sbit = 0; + pm.test_gamma_strip16 = 0; + } + + Try + { + /* Make useful base images */ + make_transform_images(&pm.this); + + /* Perform the standard and gamma tests. */ + if (pm.test_standard) + { + perform_interlace_macro_validation(); + perform_standard_test(&pm); + perform_error_test(&pm); + } + + /* Various oddly sized images: */ + if (pm.test_size) + { + make_size_images(&pm.this); + perform_size_test(&pm); + } + + /* Combinatorial transforms: */ + if (pm.test_transform) + perform_transform_test(&pm); + + if (pm.ngammas > 0) + perform_gamma_test(&pm, pm.this.speed != 0, + summary && !pm.this.speed); + } + + Catch(fault) + { + fprintf(stderr, "pngvalid: test aborted (probably failed in cleanup)\n"); + if (!pm.this.verbose) + { + if (pm.this.error[0] != 0) + fprintf(stderr, "pngvalid: first error: %s\n", pm.this.error); + + fprintf(stderr, "pngvalid: run with -v to see what happened\n"); + } + exit(1); + } + + if (summary && !pm.this.speed) + { + printf("Results using %s point arithmetic %s\n", +#if defined(PNG_FLOATING_ARITHMETIC_SUPPORTED) || PNG_LIBPNG_VER < 10500 + "floating", +#else + "fixed", +#endif + (pm.this.nerrors || (pm.this.treat_warnings_as_errors && + pm.this.nwarnings)) ? "(errors)" : (pm.this.nwarnings ? + "(warnings)" : "(no errors or warnings)") + ); + printf("Allocated memory statistics (in bytes):\n" + "\tread %lu maximum single, %lu peak, %lu total\n" + "\twrite %lu maximum single, %lu peak, %lu total\n", + (unsigned long)pm.this.read_memory_pool.max_max, + (unsigned long)pm.this.read_memory_pool.max_limit, + (unsigned long)pm.this.read_memory_pool.max_total, + (unsigned long)pm.this.write_memory_pool.max_max, + (unsigned long)pm.this.write_memory_pool.max_limit, + (unsigned long)pm.this.write_memory_pool.max_total); + } + + /* Do this here to provoke memory corruption errors in memory not directly + * allocated by libpng - not a complete test, but better than nothing. + */ + store_delete(&pm.this); + + /* Error exit if there are any errors, and maybe if there are any + * warnings. + */ + if (pm.this.nerrors || (pm.this.treat_warnings_as_errors && + pm.this.nwarnings)) + { + if (!pm.this.verbose) + fprintf(stderr, "pngvalid: %s\n", pm.this.error); + + fprintf(stderr, "pngvalid: %d errors, %d warnings\n", pm.this.nerrors, + pm.this.nwarnings); + + exit(1); + } + + /* Success case. */ + if (touch != NULL) + { + FILE *fsuccess = fopen(touch, "wt"); + + if (fsuccess != NULL) + { + int error = 0; + fprintf(fsuccess, "PNG validation succeeded\n"); + fflush(fsuccess); + error = ferror(fsuccess); + + if (fclose(fsuccess) || error) + { + fprintf(stderr, "%s: write failed\n", touch); + exit(1); + } + } + } + + return 0; +} -- cgit v1.1